Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

I made these lamps.....

Posts

I made these lamps.....

#1

I made these lamps.....

Barry Irby

I have been working on my cousin's house. It's an old farm house and was never an architectural master piece. Very basic. The only thing we found in it worth saving was the railing around the top of the stairs. It had about ten coats of paint. There was a railing around the top that was approximately a 2x4 and a 4 x 4 post and a bunch of 1 x 1 pickets. The construction was country crude at best. The pickets ranged in size from about 5/8 by 1 to close to 1 1/4 by 1. They had been chopped (hatchet?) to a point at the bottom and top to fit into square mortises.

The railing had to be torn out to accomplish the remodel. I saved the parts. Cut the post in half and built a little picket rail around it. Used the larger pickets and dressed them to the same size.

I and the lamps as a gift for my cousin. She grew up in the house. I thought she would like them as a keep sake and she does. She added the shades. (I can make lamps, but I am not about to try to pick shades.)

She wants me to make finials. Any suggestions?

She took the pictures.

Comments Welcome.


Re: I made these lamps.....

#2

Re: I made these lamps.....

Al Stokka - Cambridge, Iowa

No suggestion for you but, you make nice lamps and your cousin has good taste when it comes to selecting lamps shades. I like to see more of the carved piece to the left.

Al

Re: I made these lamps.....

#3

Re: I made these lamps.....

Barry Irby

Thanks Al. I feel like I babbled my way through the description. I tried to use the pieces and keep the railing as the inspiration for the design. One of the posts still has a tiny bit white paint left in one of the crevices. The rail really was crude. There were huge nails broken off in the post as if it had been used for something else and repurposed as a rail. I had considered running the pieces through my planer to get rid of the paint, but someone here pointed out that titanium based paint might be harder than the knives and ruin them, so I hand scraped off about six layers. I personally know the rail has been there over 50 years and probably much longer. Glad I found those nails with something other than my favorite saw blade.

The carved piece is her bed. She just got that recently. I will try and see if she will send me a picture.