Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

ATTENTION: Ken Bellock *LINK*

Posts

ATTENTION: Ken Bellock *LINK*

#1

ATTENTION: Ken Bellock *LINK*

David Yoho

I've been following your bandsaw posts because I own a MM16 myself. Did you know there is a MiniMax Users Group online that might be able to answer your questions and then some? It's been a while since I checked the group messages but I know factory reps were available for answers when I last did.

Check the link below and maybe you can get some answers that will clear things up for you.

David


MiniMax Users Group on Yahoo

Re: ATTENTION: Ken Bellock *LINK*

#2

Re: ATTENTION: Ken Bellock

Ken Bellock (Houston, TX)

Thanks, I did find the group while going through the MiniMax site. I will try giving them a call tomorrow, and talking to one of their techs, and I will join the group and see if I can get some answers through there. The only reason why I hesitated to join before was because I do not have a yahoo account. Still it's worth the hassle if I can get some good advice on getting the wheels coplanar.

Thanks for reminding me about it! I'll let everyone know what I find out and how the rest of the tune up goes.

Re: ATTENTION: Ken Bellock *LINK*

#3

Rejected...

Ken Bellock (Houston, TX)

They denied me!! :( My saw not bad enough to be in their group? I'm feelin a bit like the last guy to get picked for dodgeball...

The rejection letter, links removed...

Hello,

Your request to join the MiniMax-USA group was not approved.

The moderator of each Yahoo! group chooses whether to restrict

membership in the group. Moderators who choose to restrict

membership also choose whom to admit.

Please note that this decision is final and that Yahoo! Groups

does not control group membership.

Thank you for choosing Yahoo! Groups.

Regards,

Yahoo! Groups Customer Care

Re: ATTENTION: Ken Bellock *LINK*

#4

Groucho

Rod Peterson�Ormond Beach, FL

I've always held his philosophy dear, primarily in the expectation of the near certainty that I'll be similarly rejected someday.

“I wouldn’t belong to any club who would have me as a member.”
No charge.

Rod

Re: ATTENTION: Ken Bellock *LINK*

#5

Re: Rejected...

Michael Kahn

Hi Ken,

I am the Product Manager here at Mini Max. I am not sure why you were not approved to join the Yahoo group, we approve everyone for the most part.

It might have something to do with the "Comment to Owner" section of joining. This is the area where you tell the group owner and moderator why you would like to join the group. If this section is left blank, sometimes people are blocked from joining. The reason for this is that generally spammers will leave this area blank, or they will put a one word reply for automatic approval such as "hi" or "hello," without explaining why they want to join.

If the "Comment to Owner" section has something mentioning woodworking or machinery, then that lets them know they are not approving a spammer, which would be a detriment to all the people who participate in the group (spammers are not very welcome in the group as I am sure you or any participant in a forum would agree).

Concerning the actual note you received when you were not approved, unfortunately that comes directly from Yahoo! and we don't have any control over it. If it were up to me, I'd have something explaining exactly what I explained above, and would encourage people to try again. The more the merrier we feel.

I certainly hope that you will try again. Please contact me directly if you have any trouble.

Sincerely,

Michael Kahn

Mini Max USA

Re: ATTENTION: Ken Bellock *LINK*

#6

Ellis Walentine

Thanks for weighing in, Michael

Ellis Walentine

I'm glad to hear your discussion group welcomes all serious members. I know these groups are very useful to machinery owners, and I'd hate to see someone turned away by mistake. We get our share of Mini-Max (and other brands) discussions right here as well.

Cheers,

Ellis Walentine, Host

Re: ATTENTION: Ken Bellock *LINK*

#7

Accepted!

Ken Bellock (Houston, TX)

First time I put "Need help tuning an old S45 band saw" or something similar in the comments field. Second time I just put the band saw's model and serial number. I was also able to post my question once accepted, so everything seems to be working well now.

Thanks for taking the time to respond to my post. I do appreciate it.

Ken

Re: ATTENTION: Ken Bellock *LINK*

#8

Re: Accepted!

Charles in Mtl.

Ken,

It seems there are 4 bolts to adjust the lower wheel. I am also a member of the mini-max yahoo group.

Re: ATTENTION: Ken Bellock *LINK*

#9

Re: Accepted!

Marv

Ken,

Please report back and let us know what you did to fix it.

Marv

Re: ATTENTION: Ken Bellock *LINK*

#10

Re: Rejected...

FredD

"Please note that this decision is final and that Yahoo! Groups

does not control group membership.

Thank you for choosing Yahoo! Groups. "

Helpful as hell, huh Ken?

Forked tongue English at it's very best.

FredD