Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Metal Rod

Posts

Metal Rod

#1

Metal Rod

JimG

Well, I've spent several hours on Google looking for black metal rod. Ideally I would like some nickel plated 3/16 - 3/8 dia rod for a project I am working on. I just want it to be a "fence" for a cabinet pullout I am working on. Does anyone have any suggestions?

Thanks much!

Jim

Re: Metal Rod

#2

Re: Metal Rod

Clint Searl, at the base of Haycock Mountain

Check McMaster-Carr for rod. Steel, brass, bronze, or aluminum can be be blackened with various chemicals. Birchwood Casey sells several for gunsmithing.

Clint

Re: Metal Rod

#3

Re: Metal Rod

Andy Wright - Allen, TX

How long does it need to be? Try looking for curtain rods.

Re: Metal Rod

#4

Re: Metal Rod *LINK*

Andy Wright - Allen, TX

Another thing to look at is stair rods for carpet runners


stair runner rod

Re: Metal Rod

#5

Re: Metal Rod *LINK*

John McGaw

K&S 3/8" brass rod should be as close as your neighborhood hobby shop (if they are well-stocked anyway). Otherwise Ace Hardware is a source. I much prefer to work with brass since it can be worked as easily as wood. As for making the metal black, there are a number of ways of attacking that too. Take a look at this link which covers a multitude of sins when it comes to making metal look old.


http://www.modelshipwrightsdatabase.com/Articles/MetalBlackening.pdf

Re: Metal Rod

#6

I assume you've already looked at local sources

Bill Houghton, Sebastopol, CA

Your local Ace or other hardware store and/or Borg will have mild steel rod in those diameters. I assume you've already looked at that and rejected it for appearance?

Re: Metal Rod

#7

Re: Metal Rod

John in NM

Last month I bought 3' of cold rolled mild steel rod at Home Depot. It is available in 20' lengths at more commercial suppliers that cater to fabricators of iron bars and such. A local welding supply store could probably direct you to one. One shop I worked for used to get stuff nickel plated all the time at a place that catered to hot rod builders. Stainless steel rod is also readily available, though more expensive - mail order suppliers include McMaster Carr, MSC, and Online Metals.

Re: Metal Rod

#8

Re: I assume you've already looked at local source

JimG

Yep. I've looked locally, except for junk stores. I appreciate all the responses. I guess I figured with the power of the web I would be able to find it without any problems. Lesse, black rod is a heavy metal band, ebony rod is unmentionable and decorative black rod comes up curtain rods. But, unless something else comes up, I will try to blacken some rods. I can get rods locally, just not black. Needless to say, I have never done it. So, any recommendations on a simple and inexpensive process? I need approx 30 - 35 ft. all told.

I did look a some curtain rods online but the smallest I've found is 1/2". And I just kinda hate to pay for manufacturing costs when all I really want is rod.

Re: Metal Rod

#9

Re: Metal Rod

steve mackay

Been awhile since I've looked at that section of their book but I know MicroMark does have different sizes and materials of rod. I don't suppose the biggest piano wire from a hobby shop would be big enough would it ?

Re: Metal Rod

#10

cheapest blackening....

John in NM

is to heat it up and wipe down with a rag soaked in used motor oil, or better yet, quench in oil if the part is small enough. Metal needs to be too hot to touch, hotter the better. This is a little dangerous, especially the quenching. If the oil gets too hot it'll combust spontaneously. You could also try the cold bluing solutions that Clint mentioned - not as cheap, but safer and easier. Either of those is probably better than run of the mill spray paint.

Thought of carbon fiber rod?

Your original post mentioned nickel.... I got confused anyway

Re: Metal Rod

#11

Re: cheapest blackening....

JimG

I saw carbon rod, but I don't know much about it. Does it look like hardware, or does it look like the inside of a burned resistor?

Re: Metal Rod

#12

Re: cheapest blackening....

John in NM

It doesn't quite look like metal, more like a graphite fishing rod without the gloss. Some types you can see woven fiber, some you can't. Its one of the few things that comes already black and reasonably strong.

I'd probably go the blued steel route myself, but then I don't really know your requirements or budget.

Re: Metal Rod

#14

HD and Lowes metal must all be gold

Phil Joines

I can get a 20' or 24' stick of most shapes at the local steel yard for what they sell a 3' piece.

Electrical parts, including bulbs, are cheaper at the local Dealers Electric and are better quality too.

Re: Metal Rod

#15

True...

John in NM

Those guys would be sunk if it weren't for the convenience factor

Re: Metal Rod

#16

Re: Metal Rod

JimG

Close. I'm making a pantry swing-out section. Something like this.

http://www.drawerslides.com/p/rev-a-shelf-4wp/4wbp18-25-kit

The hardware is black nickel plated (or will be) and so I was looking for some black/black nickel plated rod to install as a fence.

Jim

Re: Metal Rod

#17

Powder coating?

paul in AZ

Re: Metal Rod

#18

Re: Powder coating?

JimG

That crossed my mind also. Have you ever done it? Any recommendations or suggestions?

Re: Metal Rod

#19

Re: Powder coating?

paul in AZ

The only thing I know about it is from a shade sail over my patio installed last year. This is supported by 4x4" steel posts as high as 15 feet. The posts are powder coated and are said to be weather resistant and impervious to almost any solvent. Tough stuff. You can get all sorts of colors and finishes -matte to glossy.

How about a local search for powder coating firms? There ought to be quite a few around [there are here]. Then make your steel rods and have them coated or have them do the bending and coating.

My guess is that powder coated steel will be more attractive looking than metal blackened by any other process.

Re: Metal Rod

#20

Re: Powder coating?

Andy Wright - Allen, TX

you can buy home powder coating kits for around $100-150. You spray it on with a gun hooked to an air compressor, and then bake it in an oven. as long as the pieces you need to use will fit into your household oven then all you need is the kit.

The manufacturer "recommends" a dedicated oven, but I have done it with my father's kit in our regular oven. You just have to be careful to put down a good drip pan under the pieces and keep the kitchen ventilated (and do it while your wife is out of town :)

Re: Metal Rod

#22

Re: Metal Rod

JimG

Thanks all for all the replies and ideas. I don't know if my wife would allow powder coating or not. Sounds like maybe not if she has to be out of town. Guess I will do some local search in the phone book. And maybe some junk stores this weekend.

Jim

Re: Metal Rod

#23

Plating?

Gary Camp, Bend, Oregon

I don't know where you live but Bend (80,000 +/-) has had a plating shop since the pop. was 15,000 (sadly it was not all that long ago either). Your area may have a shop that could match the finish on your hinges exactly.

glc

Re: Metal Rod

#24

Re: Metal Rod

JimG

For anyone following this, I found a shop about 30 miles away that will powder coat rod I supply for $1.50 a foot. Seems fair enough to me. Thanks for all the suggestions.

Jim