We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I remember reading about a cast iron insert for the right side of the table saw, (replacing) that I thought was neat because it does not eat more shop real state, but I cannot remember who makes it.
I have one of those and find it quite useful. I have it mounted on the left side of my table saw and moved my existing cast iron wing to the right side. However I believe you can mount the router table to the right side of the saw, if you wanted to.
Jorge, you are not giving much information about your saw, but I would just offer what I did many years ago. I have a Powermatic # 72, which is a pretty big saw, that has a solid cast table 50" to the right of the blade. The underside has a grid of about 8" square ribs.
I don't remember how many years ago, I used a lenox hole saw to mount 3 routers under that big wing for a pretty good size plexiglas template routing project. It was kinda like having a Ritter 3 spindle shaper, uh,,,, router.
Most of the time there is only one router under there, but all it takes is a hole saw to cut through a cast iron top, if there is enough room for the base of the router between grids. And if there isn't, cutting out a grid isn't all that hard.
I have an old 10", 2HP JET cabinet saw, that has a 27"x40" cast iron top, the wings are 27'x 10", the router I want to use is a 3HP Hitachi, to accept that I would have to cut through a number of the ribs underneath and leave little metal. I don't have a way to cut a recess for the router insert, so I feel better buying it ready made rather than trying to make it myself. It will get done sooner and better, I am no metal worker.
And then, there are a whole cast iron top with an insert to match and I could built the cabinet in a day, maybe that is the better way and end up with a better tool...