Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Bonsai Display Tables

Posts

Bonsai Display Tables

#1

Bonsai Display Tables

charlie belden

In a thread over in Hand Tools I posted a link to some Bonsai Display Tables I'd done out of redwood 2x2s and old redwood fence boards I planed to remove 20+ years out outdoor weathering. Went with redwood because it's relatively cheap wood here in California and holds out outdoors.

Pam N. saw the images on the left and assumed they were Indoor Furniture and I guess thinking that bonsai were kept indoors year round. I explained that they were for outdoors and would weather to a silver gray over time and would post Before and After pics. So here's the Before and After Pic.


These are fairly quick and easy to make if you go with loose tenon joinery but not that much harder to do with hand tools - though for these you'd need a beading tool, a scroll saw to cut the "cloud lift" aprons and maybe a #45 to do the cove molding under the table top. Wouldn't be that much harder to do a chair - or a coffee table. So if you're looking for something to make -that won't take a whole bunch of time or money - something like this might be just the ticket. And were you to do one - out of rosewood - might work for an Indoor piece too.

Re: Bonsai Display Tables

#2

Ellis Walentine

Very nice on all dimensions, Charlie

Ellis Walentine

I like the classic Chinese details and proportions, the use of salvage materials and your decision to let them age naturally in the weather. Not to mention their appropriateness for displaying bonsai.

Cheers,

Ellis

Re: Bonsai Display Tables

#3

Clint Searl

Very nice looking

Clint Searl

Re: Bonsai Display Tables

#4

What does your INDOOR furniture look like!

Bill Tindall

I don't think I could bear to put such nice pieces outdoors. I'd probably find a cement block to set the plants on. In any case they are attractive tables, red or silver gray.

Reminds me of the dove tailed trunk I built for "mud" shoes out in the garage. It wound up in daughters bed room and the shoes are still in a heap on the garage floor.

Re: Bonsai Display Tables

#5

Re: What does your INDOOR furniture look like!

charlie belden

Bill:

These things really aren't that difficult to make - the joinery is just loose tenons, the mortises cut with a router. With a Festool DOMINO they're even quicker and easier to do. Bead Router Bit takes care of the leg detail, a template, some tracing with a pencil, a little bandsaw and some time on an oscillating spindle sander takes care of the "clouds". If you want to get fancier - round over the "clouds" undersides with a router bit and they're done. Chamfering the bottom edge of the tops is quick and easy. And the cove molding between the apron and the table top isn't rocket science either.

Here are two templates for the "clouds"


And here's the way I did the cove molding on the router table and a little trimming on the table saw.


They're really pretty easy to make. Making them look really nice and putting a nice Inside The House finish on them would be more work than making them. These got two or three coats of BLO and they were "finished".

As for House Furniture - well when you inherit a BUNCH of chinese rosewood furniture a) there's no room left for any more furniture and b) I'll NEVER make anything that'd look even half way decent if it's in the same room as any piece I inherited. Fortunately, I've recently taken back my WHOLE house (have either a 1 bdrm, 1 bath, 1 kitchen and a 2 bdrm, 1bath, 1 kitchen place - or a 3 bdrm, 2 bath and TWO kitchens.) and all the chinese pieces are in the front of the house. So - I WILL finally be able to make some House furniture with all the nice wood I've been acquiring over the last 8 or 9 years. That's IF I can clean off the layout/assembly bench, my work bench AND all the tops of the stationary equiptment.