Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Very Small Router Collar

Posts

Very Small Router Collar

#1

Very Small Router Collar

Rick Haverstock

Hello All,

I'm on the hunt for a router collar, template guide, rub collar, or whatever else you might want to call it. Looking for 3/16" to 1/4" outside diameter. Smallest standard size I've been able to find is 5/16" OD, which does work, but not too well for my application. Standard PC 690 router base. Tried a Google search, but it's tough as there are too many names for this gizmo. Anyone have a source?? Thanks in advance for your help.

Rick Haverstock

Re: Very Small Router Collar

#2

Re: Very Small Router Collar

FredD

If it allows it , you might try sweating a copper tube inside your 5/16ths or 3/8ths template guide and let it hang down enough that it becomes the new and smaller guide.. If it looks feasible , make sure your sleeve is well connected to the inside of the Template guide.

FredD

Re: Very Small Router Collar

#3

Dale Lenz

Re: Very Small Router Collar

Dale Lenz

Google: router guide bushings, get a boat load of sites, but did not see anything smaller than 5/16". What are you trying to do?

Re: Very Small Router Collar

#4

Re: Very Small Router Collar

Wade Mackey

You might want to check out Stewart MacDonald. They sell a lot of musical instrument repair and building stuff and have a lot of small router pieces.

Re: Very Small Router Collar

#6

Re: Very Small Router Collar *LINK*

del schisler

try this site I have bought from bob and rick


http://us.oak-park.com/catalogue.html?list=BG--&product=G03

Re: Very Small Router Collar

#7

Re: Very Small Router Collar - Oak Park

del schisler

will this do It is to early for me to translate the size's I buy lot's of items from rick and bob http://us.oak-park.com/catalogue.html?list=BG--&product=G03

Re: Very Small Router Collar

#8

Re: Very Small Router Collar - Oak Park

Rick Haverstock

Thanks to all that responded. Fred: not a bad idea to sweat tubing into an existing collar, except for the fact that router bit length won't allow it. Wade: Went to Stew-Mac first. As a guitar and banjo player I already knew that they had some tools for instrument work, unfortunately, template collars were not among those tools. Pecker; Already have the Whiteside inlay set, it has a 5/16" OD collar, nobody else makes anything smaller. Del: The Oak Park site did have a 1/4" OK collar BUT it's only available in a non Porter-Cable size. By the time I buy the collar, a locking nut (P-C ones won't work)and the Oak Park base for my router I'm out close to 50 bucks to gain that 1/16th of an inch. Too many dollars for this guy. Thanks again all.

Rick Haverstock