Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

'Splined Miter Joint' - How To

Posts

'Splined Miter Joint' - How To

#1

'Splined Miter Joint' - How To

Bob S

These photos show my coffe-table top, the way it will be assembled. A piece of glass will sit in the rabbet.

I am very confused about how to make the Splined Miter Joint. Please comment on A,B,C, or D. Which way is it done for best results. The Red arrows depict GrainDirection on the spline.

Thanks, Bob


Re: 'Splined Miter Joint' - How To

#3

Yup, B

Jesse Cloud

Re: 'Splined Miter Joint' - How To

#4

Another vote for b

Bill Houghton, Sebastopol, CA

b and d orient the grain for maximum strength in the joint - wood breaks way more easily along the grain than across it.

b looks to give more gluing surface than d and it orients that gluing surface in line with the stress on the joint. Plus, it should discourage the miter from opening.

Re: 'Splined Miter Joint' - How To

#5

Re: 'Splined Miter Joint' - How To

Ron Bauman

A year ago I completed a 7' long Wh. Oak table with splines running the full length between each board (4' wide about eight board. I oriented the spline's grain at right angle to the major boards. Hasn't moved since.