Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Box for conductor's batons

Posts

Box for conductor's batons

#1

Box for conductor's batons

Johanna

I have been commissioned to make a box for a conductor's batons. The customer wants a "pencil box" with a sliding lid made of bocote. No real issue with any of this . . . BUT

Can anyone suggest a nice way to secure the lid so it won't slide open unexpectedly? The only idea I have had so far is a dowel-like device that could slide down behind the inside of the end of the box. I'm not sure just how I could make it so it always has a bit of resistance no matter what the weather. (Weather is a major consideration - I live in New Mexico (think 10% humidity) and the recipient lives in Seattle (100% humidity!).

Maybe just little magnets embedded in the lid and the frame???

Any other ideas? Anyone ever do this themselves?

Re: Box for conductor's batons

#2

Re: Box for conductor's batons

Neal in San Jose

How about a bullet catch? You could install it from the "bottom", just thru drill a small hole to allow the top of the bullet to protrude, then enlarge all but the top of the hole for the body of the bullet and the spring. Plug it with a matching (or contrasting, for that matter) dowell. Allign a detent in the cover and Bob's your uncle.

Re: Box for conductor's batons

#3

Re: Box for conductor's batons

Lee Schierer McKean, PA

Embed a rare earth magnet (small one) in the side of the box and a small piece of steel in the lid. When closed the magnetic attraction should keep the box closed, but you should be able to slide the lid. If at first your magnet is too strong, embed the magnet a bit deeper and cover it with a thin wooden plug

Lee

Re: Box for conductor's batons

#4

A Rare Earth Magnet Would Be My First Choice Also

George Colonel's Workshop-Havertown PA

Good Afternoon Joanna,

I commonly use them in nearly all fastening/securing furnature functions now, and can surely recommend Lee's suggestion.

George

Re: Box for conductor's batons

#5

another vote for Rare Earth Magnets.

Barry Irby

You Might be able to drill up from the bottom and install the magnet and then cover it with the bottom of the box. You could laminate the top in two layers and Hide the metal or magnet in between the layers. Then the rabbit on the side for the slide would hide the layers.

I made a hunt table with the magnets built into the doors when they were assembled and in the top rail before the top was installed and there is nothing to see. Works like magic.

Re: Box for conductor's batons

#6

Re: Box for conductor's batons

Jesse Cloud

Both suggestions above sound solid. Woodworker's Supply carries both rare earth magnets and bullet catches.

Mainly though, I just wanted to say "What a cool commission!!"

Re: Box for conductor's batons

#7

Yes Barry! Magnets CAN Be Attractive

George@Colonel's Workshop-Havertown PA

Re: Box for conductor's batons

#8

Make it REAL simple. Conductors are

Forrest Addy

I've dealt with dozens of conductors. Make it REAL simple. Conductors are technically challenged - no, make that utterly stupid about anything that is not connected with music, free food, or pursuing funding grants. Symphony, opera, choral, you name it, they have to be babied especially as curtain time approachees. Better take the baton out of the box and hand it to him before he goes on. Woman conductors are not nearly so ditsy. Maybe because they've learned the difference between status and achievement.

The magnet sounds like the best idea: no moving parts.