Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

refreshing Melamine cabinets - Paging Jason Roehl

Posts

refreshing Melamine cabinets - Paging Jason Roehl

#1

refreshing Melamine cabinets - Paging Jason Roehl

Carol Reed

I am in the midst of a kitchen re-do. Don't have the time nor money left to replace the kitchen cabinets. The old cheapo cabinet boxes and shelves are an almond color and looking really tired.

Haven't yet tried any super cleaning products - ordinary soap and water didn't change much. Suggestions?

Wouldn't think one could paint these things? Paint on Melamine? Can it be done successfully?

Incidentally, we are discussing only the interiors. The exteriors are oak veneer. That freshened up nicely.

Thanks!

Re: refreshing Melamine cabinets - Paging Jason Roehl

#2

Jason Roehl in Lafayette, IN

Re: refreshing Melamine cabinets - Paging Jason Ro

Jason Roehl in Lafayette, IN

Sorry I took so long to get back to you, Carol--I saw your post this morning, but didn't have time to type out a reply. I had to take my boys to their first of several Hunter's Education classes put on by the Indiana DNR so that the boys can participate in the 4-H Shooting Sports.

Anyway, yes, melamine can be successfully painted. The question is what the definition of successful is. All paint fails eventually, then you have even more work on your hands to renew it.

What it would take is significant abrasion of the melamine surface (probably in the 120-150 grit range), a good bonding primer, then at least two coats of a good enamel. I lean towards waterborne products. In this case where you're talking about the cabinet carcasses, and solvent-based product will off-gas for some time to come, meaning you either have to let them air out for a month or more, or put up with smelly dishes.

That said, it would be quite a bit of work to paint the carcasses, even if you have access to spray equipment. By hand, it's probably even more, but you have a little more flexibility in terms of being able to work on them for an hour or two here or there. With spraying, you want to do it in as contiguous a manner as you can.

I would recommend NOT painting them if you can avoid it. Melamine is pretty durable, so you should be able to get pretty aggressive with your cleaning. 409, Simple Green, vinegar/water, baking soda/water, any or all of the usual suspects would be in your arsenal here. It just depends on what you are trying to clean off (and this is starting to get outside the scope of my expertise... :D I don't do much cleaning).

I hope this helps and have fun!

Jason

Re: refreshing Melamine cabinets - Paging Jason Roehl

#3

Re: refreshing Melamine cabinets - Paging Jason Ro

Carol Reed

Thanks, Jason.

I think I will clean them as best I can and live with them until I am willing to make new boxes. I am adding to the cabinets, and they will be white. But they are on an opposite wall incorporating a floor to ceiling pantry. Hopefully it won't look too weird. I can make some oak doors to match and trim out the edges with Melamine Oak tape like the originals. The casual uninitiated eye probably won't see the difference until they open a door.

I have spray equipment but the odor problem (that I had not considered) tipped the scale for me.

Thanks for your expertise and willingness to share. You saved me a ton of grief!

Re: refreshing Melamine cabinets - Paging Jason Roehl

#4

Re: refreshing Melamine cabinets - Paging Jason Ro

Gary Camp, Bend, Oregon

1/4", white melamine panels cut to fit the inside of your existing boxes? Or dare I say it, white contact paper?

oh did you ever solve your heater problem?

glc

Re: refreshing Melamine cabinets - Paging Jason Roehl

#5

heater problem for Gary

Carol Reed

Yes and no. I got a propane valve installed in the car port but it won't fire the Mr. Heater. due to Mr. Heater's integral regulator behind the gas company's regulator. So back on the tank.

However, there was this funny yellow orb in the sky today, and the thermometer was higher than it has been for months. There is hope that the shop heater is a mute issue for a bit.

Next solution is a new shop building with a gas furnace. Construction in August - I hope!