Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Is there such a thing as a self centering

Posts

Is there such a thing as a self centering

#1

Alan Young

Is there such a thing as a self centering

Alan Young

vertical jig for round objects? Imagine you have various pieces in unspecified diameters ranging from 2" to 4" and you desired to drill holes down the center. Chucking the piece in a metal lathe and drilling from the tailstock would be the easiest way- but when the diameter of your work piece is too large...what options are there?

Alan

Re: Is there such a thing as a self centering

#2

Re: Is there such a thing as a self centering *LINK*

Bill Houghton, Sebastopol, CA

Machinists have centering layout tools with a 90 degree center head and a combination rule (as used on a combination square) coming out of the corner of the head, bisecting the angle (45 degrees each way from rule to head, in other words). Putting the rule against the end of the round object, with the head up against the cylinder wall, allows you to scribe an angle; doing that in a couple of places around the cylinder gives you the centerline of the cylinder. Look at the leftmost attachment on the picture at the Tools for Working Wood site, linky below.

Turners use a similar principle with several kinds of simpler devices.

Either way, once you've got your center marked, you figure out how accurate your vertical hole needs to be and go from there - eyeball it, or set up a jig on a drill press.

I don't know if anyone makes a self-centering jig like that. I can imagine how it would be done - rack and pinion slides with pins sticking down. I just don't know if there's enough need for anyone to have made such a thing.

NOTE: Remember, if you're buying from a WC advertiser, go to the site through the WC Marketplace, to give Ellis points with the advertiser; helps support WC.


http://www.toolsforworkingwood.com/Merchant/merchant.mvc?Screen=PROD&Store_Code=toolshop&Product_Code=ST-COM.XX&Category_Code=TMS

Re: Is there such a thing as a self centering

#3

Ellis Walentine

Bridge City

Ellis Walentine

John Economaki makes one that goes up to 2" diameter and includes about a dozen hardened drill bushings in common sizes. It is very accurate, and the bushings keep the bit straight, which is a problem with eyeballing the hole on the drill press. At $499, it's a bit pricey for my budget.

It wouldn't surprise me if one of our big mail-order suppliers had something along these lines, but I haven't done the homework.

Ellis

Re: Is there such a thing as a self centering

#4

DP Jig

Mark Mandell - Gone Round In Jersey

Alan,

I built a aux table for my DP that has a verticle clamp. For round stock I use cauls. I set up the workpiece with the center marked using a center-finder then plumb both the workpiece and the drill bit with a level. I then dril starting with 1/8 bit and steping up to ream in 3/16ths increments Not machinist toleraces [I'm sure to be off a 1000th or so in 12 " depth] but it's CEFGW.

The aux table is built from plans marketed by Mighty-Trak. Works well.

Re: Is there such a thing as a self centering

#5

CEFGW??

Tom Rex in TX

Re: Is there such a thing as a self centering

#6

Alan Young

"Close enough for Goverment Work"

Alan Young

My dad used to say that but never wanted us to work that way...:^)

Re: Is there such a thing as a self centering

#7

Alan Young

I searched for that and found it... *LINK*

Alan Young

Ellis- That jig is quite versatile and would do the trick but I won't have enough holes to drill to make it affordable...

Alan


Jig

Re: Is there such a thing as a self centering

#8

Alan Young

Re: DP Jig

Alan Young

The two factors are centering the hole and drilling it parallel with the sides. As Bill pointed out, the centering factor can be accomplished. It's getting the hole drilled parallel. It's not an absolute situation but the pieces I'd be dealing with are too long for my bench top drill press so -I'd be in need of a solution that can be accomplished with a hand drill....my work around is to drill the hole with a standard dowling jig through square pieces then turn them round on the lathe-Probably the method I'll use...

Alan

Re: Is there such a thing as a self centering

#9

BTDT - SOP

Mark Mandell - Gone Round In Jersey

Re: Is there such a thing as a self centering

#10

Re: Is there such a thing as a self centering

Andy Wright - Allen, TX

you could make your own jig. I would envision taking a bushing similar to this one mounted in the center of a small piece of MDF or plywood:

http://www.leevalley.com/wood/page.aspx?c=2&p=32317&cat=1,180,42311

You find the center using the marking tool mentioned earlier that is common for turners, then line up your jig, clamp it in place and drill the hole

Re: Is there such a thing as a self centering

#11

Sliding Scale

Mark Mandell - Gone Round In Jersey

1. Mil-spec

2. Tighter Than a Vestial _ _ _ _ _ _

3. Plumb, Square & Level

4. CEFGW

5. Horseshoe Close

6. H-bomb Close

Re: Is there such a thing as a self centering

#12

you forgot hand grenades.  USMC boot camp 1969

Bruce, a MN Galoot

Re: Is there such a thing as a self centering

#13

5-1/2 [sheesh ]

Mark Mandell - Gone Round In Jersey

Re: Is there such a thing as a self centering

#14

Would a centering scope work?

Gary Smyth

Enable operator to locate work for drilling, boring, etc., on vertical milling machines, jig bores or drill presses.

Edges, lines or punch marks on work piece can be quickly located or centered relative to the axis of the machine, locate lines.

To use, simply place instrument in machine, locate lines on work to match crosshair lines in viewing aperture.

Knurled sleeve on lower end of scope is turned to compensate for misalignment.

The work layout intersection is now in the exact center of the spindle axis, ready for cutting tool.

True position accuracy �.0001".

Crosshair reticle for use as reference of X and Y axis.

Eyepiece angle 60�.

Field of view 1/8". Working distance 1" from lens

Re: Is there such a thing as a self centering

#15

Re: Is there such a thing as a self centering

Barry Irby

I have no Idea if this would work, buy why not turn a cone shaped hole into a piece of wood mounted on your lathe. Use your tailstock to drill a hole through the center.

Place it on top of your sphere and drill through the hole.

Or, Could you turn a jamb chuck on your lathe and drill each on with the tailstock?

Re: Is there such a thing as a self centering

#16

Re: "Close enough for Goverment Work"

Bill Houghton, Sebastopol, CA

My dad used to say that too. I worked for a government electrician once - community college district - who got really really offended when I happened to say that.

He actually thought that way - damn near ran EMT straight across a blackboard once until I suggested another approach - and I think he hated to have his attitude expressed out loud.

Re: Is there such a thing as a self centering

#17

Got a friend with a Shopsmith?

Bill Houghton, Sebastopol, CA

This is one of the two best features of a Shopsmith - they make incredibly good horizontal boring machines. You can fine-tune height, set up clamps on the table, even do angled holes. I picked up an old 10ER for $15 at a garage sale years ago, and have been holding onto it in hopes that I'll someday have a big enough shop, as much for that function as for anything else.

Re: Is there such a thing as a self centering

#18

Re: Is there such a thing as a self centering

Bill Houghton, Sebastopol, CA

Hey - an actual serious response to the "self-centering over multiple radii" original question. Goodo, Barry!

Re: Is there such a thing as a self centering

#19

Re: Is there such a thing as a self centering

Barry Irby

I am not a machinist. What I would do is turn the hollow cone as I suggested. I would set it on the table of my drill press (Mine is a floor model, so it has plenty of vertical range.) I would use the drill bit to center the cone under the chuck and clamp it in place. Them with a center punch, put a mark on the sphere so the bit would not walk around. Carefully center the mark under the bit and drill the hole. The if necessary increase the size of the bit.

Or you could make a donut chuck and chuck them on lathe and drill them with the tailstock. Have no idea how accurate they need to be and also how well any of these ideas would work.

Re: Is there such a thing as a self centering

#20

Re: CEFGW??

Barry Irby

When I was in high school a friend and I earned spending money and college money working in our shop. Churches would come and ask us to do things for them for free. Occasionally it was my church or his, but most of the time it was just another church. Our parents insisted we should help them. They were very demanding once they got going. They wanted us to pick up and refinish furniture or repair it. We would agree to do the work if they would bring the stuff to the shop, but they couldn't get any member with a truck to deliver the stuff. We burnt up a lot of time on this stuff. The saying became "Good Enough For Church Work".

Re: Is there such a thing as a self centering

#21

Close enough for sewer

charlie belden

In surverying you use the accuracy required. Om the "old days" (pre-laser geodometers) property surveys required a LoVar tape and a spring tension gauge to adjust for temperature changes in the tape's length. Staking curb and gutter needed only a regular surveyor'r metal tape "chain". When staking controls for a sewer line a cloth tape was close enough.

We'd spent two days staking out the corners of a very expensive chunk of ground when the Chief of Survey Parties came out to see how the job was going after two days time. As a new chainman I answered "Close enough for sewer." He looked shocked - and the crew chief glared at me. The chewing out came AFTER the Chief of Parties left the job site.

When it comes to woodwork, "close enough" has a similar range of meanings.

As for "close enough for government work" - that was pretty damn accurate when making parts for jets, or space shuttles.