Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Info on Asian built 15" wide belt sanders

Posts

Info on Asian built 15" wide belt sanders

#1

Info on Asian built 15" wide belt sanders

David McDonnel

Anyone want to offer me some info/experience on the ShopFox W1689, Griz G9983, Gen Int'l 15-040, Sunhill SDM15 wide belt sanders? They all look they come off the same assembly line. The Gen Intl looks like it doesn't have a platten, instead they went with an 8" drumon the bottom. I'm looking to upgrade from my Delta 18/36 drum sander. Any and all relevent info is appreciated!

Mac

Re: Info on Asian built 15" wide belt sanders

#2

Re: Info on Asian built 15" wide belt sanders

John Luke

I've had the Sunhill for about 10 years now had to replace the diaphragm and return spring in air operated oscillating actuator once. Other than than no problems it just keeps sanding along.

Use it mainly for final thicknessing figured woods to avoid tear - out.

Grit progession is 50-80-100-150-180.

If planed thickness is close to final thickness I usually skip the two coarsest grits.

Email me if you have specific questions about machine.

Re: Info on Asian built 15" wide belt sanders

#3

Ellis Walentine

In case it matters to you...

Ellis Walentine

General International is having a three day sale starting tomorrow. If they're one of the brands your considering, find their banner on our home page or in our "Marketplace" and click through to the sale information.

Ellis Walentine, Host

Re: Info on Asian built 15" wide belt sanders

#4

Re: Info on Asian built 15" wide belt sanders

Howard

I have a Northstate and it is superb. A number of other people who I hear from feel the same. I would check it out before you buy another brand.

Howard