Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Woodworking books list

Posts

Woodworking books list

#1

Woodworking books list

DOstojic

Hello!

I'm new to woodworking and am looking for information. What top books do you recommend reading to learn as much as I can about woodworking?

Thanks!

Re: Woodworking books list

#2

Re: Woodworking books list

Carol Reed

That is a really wide open question.

Woodworking covers many diverse niches.

It would be more helpful if you would tell us what you are thinking of making. And where you are located. Many locals are willing give a hand to newbies and there may be classes nearby.

Do you have any experience at all, or any tools already?

There are many here who will be willing to help, but a little more information will make our responses to you much more pertinent.

I am a former woodworking instructor who still gives private lessons - some even over the Internet.

Re: Woodworking books list

#3

JL

Re: Woodworking books list

JL

Big wide subject. Lot of variables.

Hand tools or power tools? Flat work or lathe? Theory or practice? Design or execution? Etc., Etc.

Some of my picks:

Tage Frid's books - "Tage Frid Teaches Woodworking Set: Three Step-By-Step Guidebooks to Essential Woodworking Techniques".

Yeung Chan - "Classic Joints with Power Tools".

Hoadley's - "Understanding Wood".

The list goes on - there are lots of variables in deciding which books would be applicable to you.

Re: Woodworking books list

#4

More information needed

Bill Tindall

You ask a good question and you are off to a good start by asking it. However, the most relevant and hence "best" books will depend on what kind of woodworking you intend to do. To illustrate a couple of extremes you might be interested in "reenactment" woodwork, making stuff, or at least collecting and using tools, like it was done in 1775. Or you might be interested in building kitchen cabinets and getting on with it as soon as possible. Or, you might be more interested in woodworking as means of relaxing with little concern about how long something takes to make or even if you ever make anything for the house. You may have a talent for design, or even be an artist. Or, you may be more engineering in your talents and interestes and prefer to work from plans.

All these types hang out at WoodCentral so be knowledgeable of the source of the information as it will be colored by the interests of the person providing it. To that end, I will offer no specific book advice because I don't know your interests.

However, a few hours with a mentor, or taking a class, will replace a book or two. Join a club and find a mentor there and take a class. For specific tasks, for example hand cut dovetails, a video is better than a book. An appropriate class is best of all.

Have fun and don't get hurt.

Re: Woodworking books list

#5

Re: Woodworking books list

Grant in Iowa

Deb (correct?),

Woodworking is a great hobby, welcome aboard. There are few things more satisfying than watching your skills grow from making birdhouses to making furniture and even heirloom items.

When I began woodworking years ago, I found several books that were useful.

My memory fades on some of these, but you'll get the idea:

When I bought my fist router, I picked up a book about routers. I believe it was "The Router Handbook", by Patrick Spielman

When I bought my first bandsaw, I bought "The bandsaw Handbook", by Mark Duginske

Two other great books are "The workbench Book", and "The workshop book", both by Scott Landis.

Pretty much anything put out by Fine woodworking/ Taunton is worth a read.

Another great resource for a beginner is the www.woodshopdemos.com website. Sadly, its author John Lucas has passed away, but at least his widow is keeping the website up for the time being. A great resource for the beginner, since it has a lot of videos of power tool operations being done safely and effectively.

Let me close by saying that despite an avid hunger for books on the subject, the most important source of information for me has been this web site. Specifically the message board on which you read this response. If you make it part of your day to keep up with questions and answers on the subject of woodworking here, you will begin absorbing the lifetimes worth of wisdom that the fine folks here share on a daily basis. I know I am a MUCH better woodworker because of this site. So hang around, become part of this great community and absorb the knowledge here.

Regards,

Grant in Iowa

Re: Woodworking books list

#6

Re: Woodworking books list

DOstojic

Hey Guys,

Thanks for all the replies! This is such a friendly group.

To be more specific, I am working on a mechanical clock. I have made the gears (out of Baltic birch on a scroll saw) and am looking to learn about more exotic wood.

Are there any woods that you recommend I use besides the Baltic birch? What types would do well as gears for the clock? Are there any types of wood I should avoid? Where can I find a good source for the wood?

Thanks for all the help!

Deb

Re: Woodworking books list

#7

Re: Woodworking books list

Carol Reed

BB ply is a good choice for your clock gears. It is dimensionally stable. Solid wood of any species has wood movement issues. For clock gears that may difficult to compensate for. A slight change in dimension would result in an oval gear and your tolerances likely would need to be too close for the clock to operate properly.

Then you asked about exotic wood. I suspect the purpose you had ijn mind here was its beauty. You can find charts of American domestic woods with the rate of wood movement fairly easily. Not so easily done with exotics.

If I were you and didn't care to get into the biological natures of different wood species, I'd keep my BB plywood gears and veneer the sides of them. Now my choices for beauty would expand dramatically. Veneering something small (as opposed to a large piece of paneling) won't be difficult and won't require bunches of equipment.

Just a thought...

Re: Woodworking books list

#8

Re: Woodworking books list

mdclor

Deb,

If you go to the upper left corner of this messages page, you will find a "departments" section with book reviews. Reading the titles may give you a sense of direction. I didn't check to see if there are any books about clock making specifically.

Also, at the top center of this page is a link to WoodFinder. This tool can help you find most exotic wood that is commercially available. Good luck with your quest and please don't hesitate to come back here to ask any more questions you may have.

HTH,

Merle

Re: Woodworking books list

#9

clock wood

Bill Tindall

Gears were made from some kind of wood centuries ago and used in clocks of extraordinary accuracy. The wood would have been something available in Europe. Boxwood? You need a history book about clocks to answer your question. Ask on the Hand tool forum as there are folks over there that may know.

Re: Woodworking books list

#10

Re: clock wood

Barry Irby

I bet Boxwood would make excellent gears.

I made some gears many years ago. I have been racking my brain, but I can't remember what they were. It was a commission. They brought me the wood and I made gears.

If you decide to make them out of exotic or tropical woods be careful. Some of them seem to be inclined to cause allergic reactions and some of the reactions can be severe. Cocobolo and rosewood come to mind.

Re: Woodworking books list

#11

Re: Woodworking books list

FredD

Deb,

look into the Fine Wood Working magazine archives , they had a very good article on Wooden clocks and the geared movements, all of solid wood and a treat to look at.

FredD