Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Serp belt conversion?

Posts

Serp belt conversion?

#1

Serp belt conversion?

Rod Peterson�Ormond Beach, FL

Interesting ad in the latest Woodshop News for a Grizzly 12" planer. They use serpentine belts (a la automotive) for the drive system. It got me to thinking—is there anything to be gained by (getting rid of V-belt "thump" comes to mind) or is it even possible to use serpentine pulleys and an appropriately sized belt to run my DJ-20. Any thoughts?

Rod

Re: Serp belt conversion?

#2

Re: Serp belt conversion?

Mark Mandell - Gone Round In Jersey

poly-v belts will transmit more power on smaller pulleys, but unless your machine is bogging down in the cuts, I suspect it's a waste of time and money to convert. Sounds like more of a macho sales pitch than real merit

Re: Serp belt conversion?

#3

Re: Serp belt conversion?

Pete in Holland, MI

The thunk shouldn't hurt anything, especially on a planer. If it really bothers you, head to a power transmission store and buy replacment belts that are cut on the sides, and not simply wrapped. Cost a little more, but don't have the wrapped joint to thump. Helps out on your tablesaw too !

Re: Serp belt conversion?

#4

Don Git No Thumps

Mark Mandell - Gone Round In Jersey

Of course all my belt drives use Fenner link-belts