Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Grant in Iowa - paging Grant *LINK*

Posts

Grant in Iowa - paging Grant *LINK*

#1

Grant in Iowa - paging Grant *LINK*

Carol Reed

Sorry for the public post but there is no email associated with you here.

I found this tractor. See link below.

and want ultimately to be able to push snow, tow a wagon, and add a mower deck. Also got the harebrained idea to add hydraulics via a 12v hydraulic pump. (Have one actually). But first it would get a topper for sun shade.

I can deal with the carburetor and battery problems.

Is this one reasonable for my intended useage?


http://phoenix.craigslist.org/nph/grd/1613986956.html

Re: Grant in Iowa - paging Grant *LINK*

#2

Re: Grant in Iowa - paging Grant

Grant in Iowa

Hi Carol,

While the John Deere 116 is classified as a lawn tractor, it would likely work fine for your light duty needs. I'd equate it to an entry level garden tractor available today. I wouldn't pay $300 for it, however. Maybe $150 if it is all there and you have a line on a mower deck. The limit of its towing capacity will be traction, which can be improved with different tires or just some weight on the rear axle (not a reference to the drivers girth!). Also keep in mind that the same limits apply to braking in a down hill loaded trailer situation.

I'll assume John Deere is popular in your area. It should be a fairly simple matter to locate a used mower deck and snow blade/ snowblower for that machine. Part of why the major brands are better bets for a used buyer.

So long as the snow you get is fluffy and not wet and heavy, the snowblower is the way to go, as it puts less stress on the drivetrain. I'll confess I am not sure how often or how much you get snow in your area. If the snow is often wet and heavy, then a blade may be a better option as snowthrowers often clog with wet heavy snow. A blower would be best for fluffy or heavy snowfalls.

The ad talks about the tractor not running. Be cautious and make sure the engine at least turns over before laying any money down. Reason is that if you can't determine that the engine and transaxle are in working order, it may cost more than the tractor is worth to fix it. Yes, John Deeres hold their value, but that may be too much for a tractor that may have unkown problems. The good news is that parts area readily available for it from a JD dealer, if a bit expensive. Also note that John Deere doesn't have a monopoly on engine parts, so you can note the model # of the engine and find them online from various sources at a discount.

At least here in Iowa, that tractor in that condition would be $100 max, but you can judge what it is worth in your area based on the other ads you've seen.

Anyway, sorry for the slow response, I was travelling.

FWIW,

Grant in Iowa

Re: Grant in Iowa - paging Grant *LINK*

#3

Re: Grant in Iowa - paging Grant

Carol Reed

Thanks, Grant.

I will pass on this one. Your insight is invaluable and helps me looks for certain things.

There do seem to be more John Deere's posted than others. I am not particular about brand. Deere parts are pricier of course!

As far as snow, it has been wet and heavy. A blade is more useful to me in any event. We've gotten more this year than in the recent past. I don't mow much, couple three times a summer, just indigenous grasses. The wagon will be the most used. I have an injured back that limits hauling stuff around.

I also have an old 12 volt hydraulic pump. I'd plan on making a front end lift for the blade. And a way to angle it from one side to the other. My brother is handy with a welder and loves metal projects. He'd consider this a challenge!

I missed out on an older heavy garden tractor with lug tires and on-board hydraulics. So I'll keep looking.

Care to PM me your email address? We could keep this off the forum. The only wood related part of this post is using the tractor to haul wood from storage to shop. LOL! I'd be interested in how light duty is determined for the older tractors. In the new models there is an "L" in the model number. Thanks for enlightening me.