No, Barry, you are not, but.....
Jesper, Denmark
Modern vehicles do not work without the computers installed. I am 5000 miles into a new Skoda Yeti - nearest equivalent in USA would be A VW Tiguan.
Steering and brakes are directly mechanical with some very complex servo assists, which handle various situations. Park assist is an option, where the vehicle itself finds a suitable space between two parked cars and then handles the steering and tells the driver when to go forward and when to reverse. Dustance to hard objects is with sensors in front and rear bumpers.
I did not choose this option, but the sensors would have helped, as the rear window is too high to see the front of the car behind.
The other electronics do work extremely well so far. The engine is quite complicated diesel, witch turbocharger, intercooler, EGR and Diesel Particle filter. All electronically controlled to provide excellent power (170 HP from 2.0 liters, 4 cyl, twin overhead cams, piezo electric injectors @30,000 psig) while at the same time providing excellent fuel mileage at 40 mpg.
Full time 4WD with Haldex 4 contrlling the front - rear split and electronically controlled limited slip rear. Speed sensors on each wheel manages the ESP and ABS and several other acronyms, including hill hold and downhill descent control.
So far everything works as advertized - and then some. This relatively small vehicle is as well behaved in some very different circumstances as any other car I have ever owned. Stable at high speed - 90+ mph on expressways is OK here, handy in the mountains here in Andalucia with some hairraisingly narrow and twisty roads, very capable in snow with the right tires, but really not an off-roader.
Without car computers and finite element design tools, this would not be possible.