Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

DeWalt 735 Planer - Problem

Posts

DeWalt 735 Planer - Problem

#1

DeWalt 735 Planer - Problem

awleonard

Well, I am about to start on my next "big" project, so I have been trying to get all my tool issues solved and all of my edges sharp. I had posted a while back about issues with my DeWalt 735 planer. I had tried all of the obvious fixes, shifted knives, etc. etc. Well, the other night, I was still getting the grooves, so I tried shifting the knives again (this was the second set of knives). That didn't work. So, for some reason, I decided to try another set of knives. Well, that board came out smooth as glass. Now, I've been fighting this for months. Multiple sets of knives, shifting, looking, new bolts, etc. I'm still confused, but at least the wood is nice and smooth. I AM getting a slight amount of snipr that I never had before, but it is just a few thou and maybe table adjustemtn will get rid of that? Anyway, just thought I'd report back. Thanks again to all of those who made suggestions. Whish I had a better understanding of what happened here. I may try some non-DeWalt knives and see how those work. Still thinking about the insert head, but that's a lot of dough. I found another tool issue that I'll post in another post.

Tony

Re: DeWalt 735 Planer - Problem

#2

Re: DeWalt 735 Planer - Problem

George Colonel's Workshop-Havertown PA

Good Afternoon Tony,

I followed your planer saga with interest, especially since you obviously were trying everything suggested in the responses. Since its working well now, albeit with slight snipe, I'd go with the reprieve rather than experiment further. Experiment after the project is over. Leave a glass of warm milk in the shop when the work session is over. It keeps the Gremlin quiet.

George

Re: DeWalt 735 Planer - Problem

#3

Re: DeWalt 735 Planer - Problem

pecker

I have a Ryobi planer, and after about a year started getting ridges. So I flipped the blades, which are double sided, expecting to get like new performance.

Imagine my surprise to get even worse ridges.

When I took the blades out and examined them, the "new, unused" edges were in worse shape than the year old side. How they got like that I'll never understand.

Re: DeWalt 735 Planer - Problem

#4

I wonder???

Barry Irby

Did you buy it at a borg? Wonder if you got one that had been bought and returned? Or a reconditioned one that was sold as new and somebody had flipped the knives?