Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Ooops, should have reenforced the form

Posts

Ooops, should have reenforced the form

#1

Ooops, should have reenforced the form

Thomas S Stockton

>This is what happens when you don't make your forms strong enough. The material is 3/4 MDF. I usually make solid forms but I was running low on Mdf so this one was hollow, should of added some filler in the middle. Oh well it still worked fine.

Re: Ooops, should have reenforced the form

#2

Have you ever bagged with the form outside

Keith Newton----Little Rock, Arkansas

>of the bag? For easy bends like this, I normally just put the laminates in the bag, and bend it over the form.

The form can be much less sturdy. It only has to resist the spring-back of the plys, which would not be much for this project. Something like two arcs about 3" wide X 1/4" thick mdf with a few spacer blocks between them.