Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

I need shed ideas.

Posts

I need shed ideas.

#1

Jason Roehl in Lafayette, IN

I need shed ideas.

Jason Roehl in Lafayette, IN

>Ok, here's the setup: I desperately need a shed to free up some space in my garage. The last shed I built at my last house was 8'x8', with 8' walls and a low-slope (3/12 or 4/12, I don't recall). Utilitarian, to be sure, but the proportions were not terribly pleasing to the eye. Not to mention, it was kind of an experiment on my part in not having much waste in the materials department.

In my area, I don't need a permit for a small shed (I've heard 300 s.f. and 375 s.f., but I'm not coming close to either). I don't plan to lay any sort of foundation, as the only place I can really put the shed is in a utility easement along the back of my (shallow) property. Instead, I will use the cheap, thin pavers to "float" it on the ground at the corners, after scraping off the sod and compacting the dirt a bit. That way, if the electric or phone companies ever need to dig, the shed could be easily moved out of the way.

Anyway, I need suggestions on proportions. I'm planning on something anywhere from 8'x10' up to 12'x12', with a GAMBREL roof. I've read that the typical slopes on a gambrel roof are 30� and 60� off the vertical. I don't care as much about material waste this time, but I'm also shooting for a budget of about $700, give or take. I'm 6' tall, so I'm thinking the side walls need to be at least that tall.

I guess what I'm after is what dimensions for the side walls and the 4 segments of the gambrel roof will look good for the various base dimensions (8'x10', 8'x12', 10'x10', 10'x12', 12'x12').

Thanks in advance,

Jason

Re: I need shed ideas.

#2

Re: I need shed ideas.

Ralph Lipeles

>Jason,

I would think about a gambrel roof. The gambrel gives you lots of overhead storage. When I built my shed I designed a Gambrel truss that utilized 2x3's (mostly 2x6 scraps stripped down)for everything but the main cross piece that was a 2x4. I then layed out the truss design on plywood sheets as a master assembly aid, precut all the pieces and assembled all trusses. I used scraps of 1/2 plywood as gussets on eace sid of the trusses except the 1st and last which only had a gusset on the inide. Now the plywood pattern can be disassembled and used as sheathing or stripped in half for shelving. If you have cold winters, the shed sitting on blocks may move in the winter and there may be days that you cannot open the door.

Ralph Lipeles

Re: I need shed ideas.

#3

Re: I need shed ideas.

Barry Irby

>The Shed is never big enough. The stuff expands to file the space allocated. So, either build it a lot bigger than you think you need or NOT. Build it smaller and get rid of the junk.

I made mine 12 X 16. It is contemporary in style. The floor is slightly over 16' so that I can store 16' lumber in it. The main floor is 10 x 16+ and there is a 2 x 16+ set of closets down the side. The closets have four pairs of 2' wide doors allowing for them to be nearly 100% open.

The studs that separate the closets form the main shed are about ten feet tall and on two foot centers. The rear studs are about 7' tall, creating a five in twelve pitch on the main roof. There are shelf supports on the main taller studs about two feet apart, creating shelves in the closets and a lumber rack in the main shed. There is an end door in the main shed that is double wide with a fixed panel in the middle. The right side door lines up with the end of the lumber rake so that the lumber can be accessed either from the end or the interior of the shed. The roof above the closets is about four feet below the peak of the main roof. There is a window in the wall above the closet roof.

I built this about twenty five years ago. It has served me well. I bought all the materials form a local lumber yard that has an annual sale of stuff people returned or did not take. The shed cost me $300. Of course, it was not big enough and I have added a shed to the rear or it. And now I wish it were bigger.

The local Lowes constantly has lumber sitting outside for sale at reduced prices. Check it out.

I have built many sheds for friends with gambrel roofs. Give some thought to the "height" of the gambrel. Consider your shingles. If you buy the ones that have a five inch reveal then you want to make the steep part of the gambrel work with that. Lets say you want the singles to hang down 1 1/2" at the bottom or the eave, then the first course will cover 3 1/2" of the actual roof. So, add some multiple of five inches to 3 1/2" to set the height of the steep part. This little step makes the roofing go easier and look better.

Re: I need shed ideas.

#5

Re: I need shed ideas.

woodenleg

>I have a nice 8 x 12 shed with a 3/12 pitch. I built it on 3 skids and used them as the floor supports. I went with 3 skids because I park my four wheeler and riding lawn mower in side. I also used skids in case I have to move it, plus I built it in my buddies shop and used his farm truck to move it to my home. I can move it with my four wheeler with the heavy stuff out. I used 2x4's has rafters. It has a walk through front door and and a big 2 door opening that is big enough for me to get my riding stuff out. I got the idea from reading books on sheds in the big box stores and my local lib. Good Luck Dave

Re: I need shed ideas.

#6

At the risk of being obvious

Gary Smyth

>Have you checked with local library or bookstore--even Amazon if in purchase mode. A few: Buildings, Small Barns Sheds and Shelters, Monte Burch; Sheds and Gazebos Ideas and Plans, Better Homes and Gardens (HD and Lowes Book Section); Great Garages, Sheds and Outbuildings,145 Projects, Home Planners; Build Your Own Garage Manual, (U Can Do Series) HDA Inc; Gazebos and Other Outdoor Structures, Creative Homeowner; Sheds, The Do It Yourself Guide for Backyard Builders, David Stiles; Building a Shed, Joseph Truini Build It Like a Pro Series, Taunton Press;Garages and Carports, James E. Russell, Creative Homeowner Press. Others are available too. Gives at least a start and building techniques. Magazines (Family Handyman 2002, September) had some help.

Gambrel roofs might best be found in roof paperbacks. Ortho Book has books for both Sheds and Roofs and Time-Life does too (Outdoor Structures).

Re: I need shed ideas.

#7

Jason Roehl in Lafayette, IN

Re: At the risk of being obvious

Jason Roehl in Lafayette, IN

>Let me rephrase what I'm after--I'm after "big picture" concepts, such as general ratios. I'm not at all concerned about the brass tacks of construction, that I can handle. I've already got 4 books from the library that I skimmed through, and there are some good pointers in each of them, but when it comes to dimensions, there might be a single plan that only shows floor dimensions, but nothing about what is pleasing to the eye in terms of wall height vs. the two gambrel slopes.

I'm thinking that the two slopes need to be equal for visual appeal, but what is an appealing side wall height for a given width of the structure? Obviously, a gambrel roof would look silly if it were 20' wide and had a 4' side wall, with all the slopes being of equal length and at the usual 30� and 60� slopes. How would a 10'W x 12'L shed look with a 6' side wall or an 8' side wall (less waste)?

Jason

Re: I need shed ideas.

#8

If what you are looking for

Gary Smyth

is an aesthetic ratio I would look for the "architectural golden proportion". Any browser will get you there. If you want some architectural standards, try the Architectural Standards Series out of McGraw Hill. Pricey and probably overkill and minimal value for small buildings but another source.

There are tons of "barn" plans offered on the web, and magazines like Rural Builder can get you leads to outbuildings. Contact to steel building companies will likely get you required dimensions for a pad and you can use that to build off of their dimensions.

Re: I need shed ideas.

#9

Re: Let me add...

Glenn Madsen---in SF Bay Area

SketchUp is free, and runs on most modern computers pretty well. You can play with designs and roof angles and perspectives, sitting at your console, and spending nothing on materials, while the snow builds up in the yard, and you will likely find something that you can look at for the next couple of decades.

It beats building physical models for all of the options.

You can just do the shapes, and not worry about the structure, too. Quicker that way.

Re: I need shed ideas.

#10

Jason Roehl in Lafayette, IN

Re: Let me add...

Jason Roehl in Lafayette, IN

Yeah, I knew all that--I was just not wanting to reinvent the wheel, or so to speak. I know what the Golden Ratio is, and I have played a little (very little, and a few years ago) with SketchUp. I was just hoping that, with the wealth of knowledge owned by the contributors here, that someone would say, "Oh, that's easy, for a gambrel of X width, and side wall of Y height, you need Z-length sections on the roof. Sometimes a few keystrokes here and a little patience pays off in the effort department... :D

Jason