Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Looking for a bifold door handle

Posts

Looking for a bifold door handle

#1

Looking for a bifold door handle

davhamm

>At work on the bifold doors we have pulls mounted near the hinge. I have found one on line but they want $20 a piece has anyone seen these anywhere else?

http://www.doorandwindowparts.com/handle-bi-fold-door-handle.html?source=googleps


img

Re: Looking for a bifold door handle

#2

Re: Looking for a bifold door handle

FredD

>If these are bifold closet doors all you need is a simple wood or metal knob in the center of each pair or center of one door per pair.

FredD

Re: Looking for a bifold door handle

#3

Re: Looking for a bifold door handle

davhamm

>That is where I am headed if i can not find these pulls anywhere *well for less than $20 anyhow*.

I just like these. My kids are hard on the handles and they never stay tight / some times they pull the screw through the door... Just seems a better way to do a handle on a bifold, but others must not agree.

If you open the door 100% they do not work but as long as you only open about 75% they work fine. If you do open all the way, just grab the door to close.

Re: Looking for a bifold door handle

#4

Re: Looking for a bifold door handle

charlie belden

>Hmmmm - a door handle tht only lets you open the door 3/4 open - beyond which you must close the door by pulling on the door because the handle becomes unusable?

Genius!

Re: Looking for a bifold door handle

#5

Re: Looking for a bifold door handle

davhamm

>Not sure how many bifold doors you have used, but my experience the handle gets used to open then about 25% of the way then everyone just graps the door. Closing is usually a pull of the door and a push with a foot.

But clearly most don't think this way when installing them. I have 6 bifold doors in my house 5 of them do not even have handles currently .. and its been that way for a loooooong time.