Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Laguna Driftmaster band saw fence

Posts

Laguna Driftmaster band saw fence

#1

Laguna Driftmaster band saw fence

Howard

>Anyone have any experience with the Laguna Driftmaster band saw fence. I�m particularly interested in how hard is it to get the fence perfectly perpendicular to the table.

Also it seems terribly overpriced.

Thanks

Howard

Re: Laguna Driftmaster band saw fence

#2

Re: Laguna Driftmaster band saw fence

Brent Smith in Montreal

>Hi Howard,

I've had one on my LT18 for a couple of years. It performs as advertised, but as you say is overpriced at MSL. They do have it on sale from time to time though. Setting it up is easy and painless. A straight edge and 10 minutes was all it took to get it perfectly aligned with my saw table. My one complaint with it is the threaded rod the fence is adjusted on. It is, imo, drastically under sized. If you're not careful during set up it can be twisted. This 'problem' may have been addressed since I bought mine when they first started production.

Re: Laguna Driftmaster band saw fence

#3

Re: Laguna Driftmaster band saw fence

Dick Mahany

>I installed one on a 10 year old Delta 14" bandsaw with riser block. It works great and I got it from Laguna for a very reasonable price last month. I also installed their carbide tipped resaw blade (3/4") and can't believe what I have been missing. It's a lot of fence for this saw, but works as advertised and I wish I had done it sooner. So far, I have only resawed dry burls and figured maple and have no experience with green wood on this fence or blade.

Re: Laguna Driftmaster band saw fence

#4

Installation on a 14" saw questions

Scott in Montana

>Dick,

How did you attach it to the Delta's table? Did you re-drill and tap the factory holes to 1/2"? Drill new holes? Use the existing holes some way? I have a Driftmaster I bought a bit over a year ago and am hoping to get it installed this spring. Please advise.

Thank you,

Scott in Montana

Re: Laguna Driftmaster band saw fence

#5

Re: Installation on a 14" saw questions *LINK*

Dick Mahany

>For the Delta saw, I drilled new 1/2" holes in the two bosses on the front edge of the casting. The bosses are sufficient in size to securely anchor the universal mounting brackets, however there isn't enough room to drill new holes without affecting the factory drilled loles for the stock fence. Since the new holes would break through into the existing factory holes, I simply clamped the universal mounting brackets to the edge of the table and used them as guides for the 1/2" hole that I drilled in one shot witout difficulty. (If I ever sell the saw, I'll need to get creative on how to reinstall the factory fence since those holes are only partially there anymore.)

I have a few pics at the link below.


http://picasaweb.google.com/dmshopshots

Re: Laguna Driftmaster band saw fence

#6

Re: Installation on a 14" saw questions

Scott in Montana

>Thanks Dick. That helps a lot!

Scott in Montana