Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Eucalyptus wood

Posts

Eucalyptus wood

#1

Eucalyptus wood

Hamish

>Good afternoon,

Last night we had gale force winds that brought down a number of eucalyptus trees in our area. Some of them has fallen across the road and were being cut up as I passed them. What attracted me to them was the flaming orange red colour of their cut interiors. I then began to wonder if I could collect some, cut it up into short planks on the band saw and dry it naturally under cover away from the light, with the intention of preserving it's rich colour. Usually if left to the elements, it turns a rather dirty brown.

My questions are, does anybody have any idea if this would be possible, to keep the colour I mean and is eucalyptus a good wood to work in, as I have never heard it mentioned by anybody before on Woodcentral?

With thanks, Hamish.

Re: Eucalyptus wood

#2

Re: Eucalyptus wood

Bill Tindall

>I don't know if there are various varieties but something called eucalyptus (actually lyptus) is a commercial species. I saw it used for outdoor trim in Hawaii. It was a pretty wood and I was told it worked fine.

Re: Eucalyptus wood

#3

Re: Eucalyptus wood

Carol Reed

>Dried Eucalyptus rivals concrete for hardness and Texas longhorns for twistiness. You will learn lessons is sharpening your tools with this stuff.

Lived in San Diego county for 25 years. The story is that scads of Eucalyptus was planted in anticipation for railroad ties. Two things happened. The wood twisted and cracked as it dried and railroad track construction went the way of paved roads and trucking.

However, the trees loved the climate and flourish to this day. You don't read much about this wood used in woodworking because it has all the charm of an ill-tempered javalina in its toughness. Sold as red gum when available. Bought some once and watched it turn into potato chips in my shop in a matter of days.

Now if you needed some for sculptured work.... LOL!

Re: Eucalyptus wood

#4

Re: Eucalyptus wood *LINK*

John McGaw

>Some of the dozens of eucalyptus species are used in Australia for turnings and furniture. The prettiest, in my opinion, is "red gum". In the US I believe that Blue Eucalyptus was a prominent species -- it grows in vast numbers in California. It is also explosively flammable during the dry season which is the reason that some areas are destroying these trees and trying to plant native species. Some eucalyptus is suitable for furniture. More than suitable -- it is fantastically beautiful stuff. I'd try to find out what sort is down in your area and research some more to see if it is good for anything.


Red Gum Furniture

Re: Eucalyptus wood

#5

Lyptus wood

John K Jordan

>From what I read about five years ago, Lyptus is a plantation-grown eucalyptus hybrid, bred for it's rapid growth and lumber properties (stability?, hardness, density). I read it was primarily sold for flooring. As mentioned, it is in fact nearly as hard as concrete when dry!

Someone at our club chucked up a piece of lyptus and after a few tries and a bit of cursing proclaimed it HARDER than concrete - it was beating him up and throwing chunks and dust instead of shavings. When I told him it looked like a challenge he gave me his second blank:


I actually enjoyed turning it. Although it definitely was not like green cherry (!), it cut well (with razor-sharp tools), sanded up nicely, and took a good finish. I used watco oil on this bowl - I like the rim and inside but I think I over-polished the outside. The wood was not a brilliant color to start with (perhaps due to kiln drying?) but it has not lost a bit of color that I can detect in five years.

When I went to the next club meeting I took this bowl and showed the cursing guy - he was speechless! I told him he just needed to learn how to sharpen a gouge! (GrinnedDucked&Ran) I'd love to get a hold of some more.

JKJ

Re: Eucalyptus wood

#6

Re: Eucalyptus wood

FredD

>In California , many a fireplace has been destroyed by people not familiar with the heat properties of the wood.

It is loaded with highly flammable oil and once a grove catches fire , all you can do is get out of the way..

When I lived in Brentwood in Contra Costa County , I smelled wood burning all one afternoon and then a haze moved in from the direction of Oakland , about forty miles away in a straight line.

The Eucalyptus groves took out 3,500 homes and apartments in the Oakland hills that day.

When I lived up north in Humbolt county I saw a occasional Victorian in Eureka trimmed out with Gum in the interior and it was finished natural and was a really nice shade of tan or light brown.

If you plan on cutting a log or a tree , you will need to take more then one chain for the saw , one cut through a medium sized trunk will dull the chainsaw, so it won't cut anymore with that chain.

Tool rental companies I knew would not rent you a chainsaw if you told them you were going to cut some Eucs.

It makes a great fire starter in the fireplace if you use a small piece on the order of a short broom handle.

Interior decorators love the leaves for the smell in a home and it supposedly keeps bugs away.

I know from the giant tree in our back yard in the Bay area nothing would grow underneath it or the Pepper trees and you learned quickly not to park underneath either one because of the oil drips that would ruin your paint job if left on .

FredD

Re: Eucalyptus wood

#7

Re: Eucalyptus wood

Glenn Madsen---in SF Bay Area

>Our turning club loves it. We have all sorts of it in the area (see FredD'd note), and it's great to turn if you get it wet/green.

Dry, it's a pain in the tuchus. And we don't try to make flat boards of it. We've learned the hard way.