Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Inca Power Tools by Garrett Wade

Posts

Inca Power Tools by Garrett Wade

#1

Inca Power Tools by Garrett Wade

Barry

>Does anyone remember the Inca line of power tools that used to be sold through the Garrett-Wade catalogues? The line included a couple of tablesaws, a couple of jointer/planers and a bandsaw. They were marketed as upscale, highly accurate tools and resemble some of the offerings by Laguna today. Does anyone know if these tools are still made, or anything else about them? Thanks.

Re: Inca Power Tools by Garrett Wade

#2

Re: Inca Power Tools by Garrett Wade

doug f, san clemente, ca

>Barry - wonderful tools. I've gone through two table saws, a bandsaw, and a jointer/planer and I still love them. They are no longer made in Switzerland; apparently the company was bought out and moved to France. I don't have any real current knowledge of the quality of the French vs. the original tools, so I can't help you there.

Call Eagle Tools in Los Angeles and talk to Jesse Barrigan; he knows more about INCA tools than any ten people I know plus he still sells some of the original tools.

They occasionally will show up on Ebay or Craig's list and still command some premium prices.

Fun tools to own and use

Doug

Re: Inca Power Tools by Garrett Wade

#3

Re: Inca Power Tools by Garrett Wade

Jay

>Barry,

I concur with Doug's comments. I have one of the bandsaws (it is great) and recently sold the joiner / planer right here on WoodCentral. I found the machine just a little too finikity for my needs and have replaced it with a planer and a separate joiner and frankly am much happier with not having to change the set-up every time I needed one or the other. My sense is that these machines are for the most part sought by INCA afficionados, which can make them pricey. Eagle Tools (Jesse is your man there) is terrific and the only place in the US where I was able to find replacement parts & manuals. BTW, the french company never responded to my emails (and I am fluently bi-lingual so the language wasnt the problem). Good luck in your hunt.

Jay

Re: Inca Power Tools by Garrett Wade

#4

Re: Inca Power Tools by Garrett Wade

wilbur

>If you're interested in the Inca 10" jointer/planer combo, Rikon makes a 10" jointer/planer combo now that's quite nice. I have one of these. Grizzly and Jet also have similar models out now.

Re: Inca Power Tools by Garrett Wade

#5

Re: Inca Power Tools by Garrett Wade

Brent Smith in Montreal

>I had one of their TSs about 25 years ago. If I remember correctly it was a model 250 something. It had a mortising table attachment and could be used as a horizontal boring machine also. Great machine, super acurate, but I don't remember it having any kind of splitter. Lee Valley was also a distributor for a time. They might have some info on the machines in their archives.

Re: Inca Power Tools by Garrett Wade

#6

Doug in Seattle

Re: Inca Power Tools by Garrett Wade

Doug in Seattle

>I have the two wheel 10 inch benchtop bandsaw which I use to backup the MiniMax 20". The only real problem I've ever had with it is the blade length is a little odd and I cannot buy replacements at the local hardware store like you can for the typical Jet/Delta 14" models. No problem ordering blades, just if I need one now is a problem. Plus, seems like nobody (i.e., Carter) makes anything "aftermarket" for it.

Re: Inca Power Tools by Garrett Wade

#7

Re: Inca Power Tools by Garrett Wade

FredD

>Any saw shop worth it's salt can make you a band blade any length you need while your standing there.

Far faster then ordering one.

FredD

Re: Inca Power Tools by Garrett Wade

#8

Doug in Seattle

Re: Inca Power Tools by Garrett Wade

Doug in Seattle

>The Grimlins always seem to attack my blades on Friday afternoons while I'm still at work and need to finish the job over the weekend. Little trouble makers!

Re: Inca Power Tools by Garrett Wade

#9

Re: Inca Power Tools by Garrett Wade

FredD

>Band blades are cheap , buy more then one at a time ;-))

FredD