Forstner bits at Woodcraft *LINK*
Bill Houghton, Sebastopol, CA
>Anyone have any experience with these? On sale through next week.
http://www.woodcraft.com/Product/2000774/20866/Forstner-16-Piece-Bit-Set.aspx
Knowledge You Can Build On — Est. 1998
Forstner bits at Woodcraft *LINK*
Bill Houghton, Sebastopol, CA
>Anyone have any experience with these? On sale through next week.
http://www.woodcraft.com/Product/2000774/20866/Forstner-16-Piece-Bit-Set.aspx
Re: Forstner bits at Woodcraft
FredD
>Check Bormax and CMT Forstner bits same site , it only sounds like a deal.
FredD
Re: Forstner bits at Woodcraft
jared
>Hello I bought a set of these on sale a couple of years ago. The price is right. They are suitable for light use. I used a 1.25 inch bit to drill less than 10 holes about an inch deep in walnut. The sharpness was gone about half way through the project. Then I looked at a bunch of the rest of them that had never been used and they did not really have a sharp edge on them. They would have to be sharpened before they could be used. Like I said the price is right, and they are ok if you are not going to use them a lot and know how to resharpen them your self. Jared
Same bits, better price
Gil Jones
>They look exactly like the set I bought from Grizzly for $27 (including the exact same box) a couple years ago. They are from China, but seem to be fairly well made. At Grizzly they are now $29.95, and still look the same.
http://www.grizzlyindustrial.com/products/Forstner-Bit-16-pc-Set-Ground-Tips/H6334
Gil