Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Jet JWP-12-4p

Posts

Jet JWP-12-4p

#1

Jet JWP-12-4p

Bob S

>Can anyone provide comment on how good a surface planer this is? I can get one for $190 used, but in good condition. It is Blue, so i suspect it is more than a few years old. I only need it for occassional use, and am looking to add this to me tool collection.

I would use it to take down rought cut oak, maple and walnut mostlikely.

Any comments in the next day or so, could help make up my mind.

Thanks,

Bob

Re: Jet JWP-12-4p

#2

Re: Jet JWP-12-4p

Dave Bair, Eaton Rapids, MI

>Don't own and have never seen this machine...but you may want to check to be sure it has a cutterhead lock. The earliest benchtop planers lacked them and had more of a tendancy to snipe. FWIW, I'm not a JET detractor, I have a shop full of their tools.

Re: Jet JWP-12-4p

#3

Re: Jet JWP-12-4p

Andy Wright - Allen, TX

>I second Dave's opinion. I dont know anything about this model, but in general, the tool manufacturers have made a lot of improvements in benchtop planers since the "early" models.

I would take a board with you and do a test cut. I worked for several years with an old Delta benchtop planer that sniped every board, and it worked fine as long as I budgeted for an extra 3 inches to cut off each end every time I ran a board through the planer.