Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Greene and Greene hall bench done!

Posts

Greene and Greene hall bench done!

#1

Greene and Greene hall bench done!

Dave Tenney

>Here is a picture of a hall bench from the Blacker house that I just finished. Made from cherry and finished with Waterlox. This project was a real learning experience for me, and is so far the most complicated piece that I have have built. I've been scrounging pieces of cherry for the last five years, and finally used up what I had on this. This project was deceptively simple, and I have a new appreciation for the brothers Greene. If I had a bandsaw the project would have gone a bit quicker. The plans for this were in "Popular Woodworking's Arts & Crafts Furniture: 25 Projects For Every Room In Your Home" which I got at the Library. I made my own patterns...Heck, I made my own graph paper.

I am going to try to sell this item to finance a bandsaw and/or a jointer...Any advice on how to go about this? Ebay? Consignment shops? I know I'll never get enough out of it to cover the labor, but some of that is the cost of education.

Dave


img

Re: Greene and Greene hall bench done!

#2

Re: Greene and Greene hall bench done!

Thomas Skaggs, Foothills of Mount Level

>Very nice bench. Great job! Looks like you did a good job laying out the design. Selling huh? You might check local craft galleries to see if they would consign it. But they will want up to 1/2 the sale so maybe an add in the paper first?

Tom

Re: Greene and Greene hall bench done!

#3

Ellis Walentine

Tasty

Ellis Walentine

>I've always been a great fan of Greene & Greene. This looks like a very respectable rendering of that bench, although if it had been me, I probably would have cut back the gloss a bit. Just a personal preference, not a criticismo.

Selling furniture on spec is tricky. Depending on where you live, you might succeed with a newspaper ad, although I suspect it's a long shot. You might try to network yourself to architects or designers in your area. They might know who the consumers of A&C furniture in the area are. Heck, if they like the workmanship, you might get a commission or two while you're at it.

Ellis

Re: Greene and Greene hall bench done!

#4

Re: Greene and Greene hall bench done!

Bartstar

>Dave - A few questions 1) What slowed you down not having a bandsaw? 2) What was your finishing schedule (dye?, coats of Waterlox etc.).

Nice job.

Bart

Re: Greene and Greene hall bench done!

#5

Re: Greene and Greene hall bench done!

Dave Tenney

>Well, the legs are a pain. They are 1 5/8 square, tilt back, and cant to the outside. The front legs have a little jog in them, but not too bad. I do have a good jigsaw (Bosch) which is what I used. I have a 2x72 belt sander that helped out a lot getting things squared back up. I think that a bandsaw would make building any sort of project with "artistically" shaped thick stock easier. But, I've gotten by with out one for ten years. I work as a carpenter as a second job, and work has been very slow. Like one job since November. For the past 20 years we've been backed up for 6 months, and now nothing. At least I still have my day job! I figured I try to build a piece of furniture to sell and that's the basic story behind this project. Although my wife wants to keep it...

First I put on a coat of BLO. Then I tried the finish schedule that was in one of Frank Klausz's videos. 4 coats of Waterlox with no sanding in between. Then sand down to 220. Apply two more coats...I did three. It was really shiny, so I knocked it down with a green scotch brite and put on a coat of Minwax finishing paste wax. I tend to agree with what Ellis said in the reply above that It's too shiny, but I'm not sure how to correct that at this point. I used the Waterlox because I had 1/2 gallon left over from a previous paying job. I think that if I were to do this over, I would have used the homemade Danish oil finish that I usually use which is 3 equal parts of varnish, BLO and thinner.

Dave

Re: Greene and Greene hall bench done!

#6

Re: Tasty

Dave Tenney

>Ellis,

Any idea on how to knock down the gloss any? I actually knocked it down with a green scotch brite, but had to put a coat of wax on it to even it out.

Thanks for the compliment!

Dave

Re: Greene and Greene hall bench done!

#7

Re: Greene and Greene hall bench done!

Dave Tenney

>Thanks! I feel pretty good with how this project turned out...It blows me away with how some of the guys on this board are at turning out world class wood working projects. (Makes me want to quit!)

Dave

Re: Greene and Greene hall bench done!

#8

Re: Greene and Greene hall bench done!

Bob Entwisle in NJ

>Dave,

Nice work!

I've allways admired that style bench, and you've done a great job!

Bob in NJ

Re: Greene and Greene hall bench done!

#9

Ellis Walentine

Gloss control

Ellis Walentine

>You can cut the sheen at any time by using 0000 steel wool. Scotch brite doesn't cut the surface as well. Instead of wax, try putting just a few drops of Waterlox on a rag and extending it out on the surface, just enough to saturate the scratch pattern from the steel wool.

BTW, "Danish oil" finishes are not the same as varnish. They don't offer much protection.

Ellis

Re: Greene and Greene hall bench done!

#10

Re: Greene and Greene hall bench done!

FredD

>Dave,

making benches is one of my favorite pieces to make and you certainly did a bang up job.

About selling it, I would stay far away from Galleries , show it to friends who like nice furniture and especially running some photos and pricing by some Interior designers , they have the contacts with people who like custom furniture and the wherewithal to buy it.

Once you have made a designer happy and they know they can rely on you , you won't be lacking for work.

If you have any county fairs or Juried shows in your area , enter it.

FredD

Re: Greene and Greene hall bench done!

#11

Re: Greene and Greene hall bench done!

Dave Tenney

Well, it looks like I'm gonna try the county fair, because I can't seem to find anyone that wants to sell it without me basically giving it to them!

Dave

Re: Greene and Greene hall bench done!

#12

Re: Greene and Greene hall bench done!

Dave Tenney

Thanks!

Dave

Re: Greene and Greene hall bench done!

#13

Looks familiar!

Brian in Sandusky, OH

http://www.briangray.net/projectdetail.cfm?ProjectID=4

I can't remember what magazine I got the plans from, but it was obviously the same as yours.

Mine has been made for 12+ years, so I really don't remember which magazine, but I remember it being a magazine.

(and you did a much better job on yours...)

Re: Greene and Greene hall bench done!

#14

Re: Looks familiar!

Dave Tenney

Thanks Brian... I know your brother Chad. I gave him some bowl turning blanks I had milled that he was going to give you. I haven't talked to Chad in a while, but he lives about three blocks from me (at least he did about three years ago). He was showing me some of the inlay work you had done...very nice work!

Dave

Re: Greene and Greene hall bench done!

#15

Re: Looks familiar! *LINK*

Brian in Sandusky, OH

I had no idea!

I remember my brother mentioned a Dave woodworker that is nearby, but I never put two and two together.

Those bowl blanks will probably never make it to me.

I haven't used a wood lathe in quite a while. Chad took my old Grizzly lathe, so he probably already played with those blanks.

See the link below to check out what I'm doing now, which is all metal lathe operations.

Take care, and great job on the Hall Bench.


Edison Pen Co.