Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

>15 Feb 2010

Good Morning Everyone,

It's that time again for us to fess up about if we got done anything that we had planned for the weekend or not.

Me? I'm doing stuff for work, making plans to meet up with my mom & dad at M.D. Anderson Hospital in Houston, TX for the final diagnosis of my dad's newly diagnosed cancer and hopefully a good treatment plan for him. What we do know is that his cancer type is one that is extremely rare and they are flying him to M.D. Anderson to make sure this is correct, determine it's origin, and come up with a treatment plan.

So...between work, helping my kids with school work, taking time to talk life over with the wife, attend church, and the rest of my time is taken up with trying to get all this stuff worked out so I can be there for my dad.

The only woodworking I've been doing is keeping the wood stove fed and keeping the wood pile full so to keep the family warm and dry this winter.

Blessings and good health to you all.

So what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Darrell in Oakville

Re: WC Weekend Accomplishments....

Darrell in Oakville

>I was left to my own devices yesterday. I was taken with the idea of making a carved bowl, so I stole one of the decorative paper birch logs from the fireplace (she'll never notice one is gone ;^) and started in on it. Gouges, hatchet, drawknife, spokeshave and scraper. It ain't a thing of beauty, but it will hold oatmeal or chili at the Scout camp next weekend.

Darrell

Wood Hoarder, Blade Sharpener, and Occasional Tool User


img

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments

Mark Mandell - Gone Round In Jersey

>First off, best wishes and hopes for your father. Advances in treatment seem to come every day.

On a happier note, I finished and installed my friend's tap handle. Since he's staying with the single handle for now, I made the coats of arms in interchangeable frames depending on which family is the "flavor of the day."

The handle is 16" high turned in cherry. The upper section that holds the plaques was turned on a second axis to leave more wood to the rear, and the plaques are fitted with two threaded inserts. The ferrule is a piece of chromed 1-1/4" sink drain that matched nicely with the tap tower.

The coats were photographed, digitally enhanced, and then sized and printed on clear plastic sheets with an ink-jet printer. After serveral combinations of different materials, we decided on the plastic and then use white primer on the background wood. The plaques have mitered frames and then the wood was oiled with Watco, sealed with dewaxed shellac, and finished with several coats of waterborne lacquer and rubbed out. The printed graphics were then adhered into the boxes with clear casting resin and then the boxes filled with the same resin.

Here is a pic of the mounted handle. Yes the room is painted in orange & blue.


Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

Ken Bellock (Houston, TX)

>I had a lot of plans for the weekend, but the baby was teething and running a temp of 102, so a lot didn't get done. I did hang the magnets over the new workbench, and installed the power strip, but only got about half way through making and installing the clamp rack you see on laying on the bench.


I did also manage to make the long drive to the hardwood supplier, and picked up the walnut and purpleheart I need for the next project. Two weeks of letting that sit in the shop and I'll be ready to start the toy box for the baby. I also picked up a small piece of cocobolo, 2bf, which I noticed later had little holes in a couple places... powder post beetles? I have it sitting separate from the pile right now until I can see if any piles of sawdust form underneath it. I might just cut the board in half and throw it in the oven at 130 for 24 hours to be sure. I have never done that before, hopfully it doesn't cause the wood to split or anything... it's a beautiful chunk of wood and I can live with the holes.

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

John Lucas

>Turned a cool bowl with dovetails in it and then started a table. I finished the legs. Took about 1 1/2 hours to turn and sand the legs and then took about 3 hours to carve to and sand the curved feet. I hope to work on the stretchers and the top and shelf a little tonight. Probably get the planing, rough shaping and glue ups done if things go well. I'd love to have everything done but the spindles by the weekend but that's probably dreaming. It's going to have 48 spindles connecting the railing to the shelves so I'm trying to get my mind in production mode to turn those out.

You can see the drawings I made above. The one on the right is the final design. I cut the template for the legs and then turned a 2x4 leg on Friday to make sure I liked it. Then used this to set all the dimensions for the Walnut legs. Around here the walnut you get sucks. It all has sap wood. I had to buy a 7'x6" blank to get 4 legs that had solid heart wood. That sucks. At

Re: WC Weekend Accomplishments....

#6

Re: WC Weekend Accomplishments....

Gil

>Picked up a powermatic 66 table saw and unloaded it into my future shop. Now I need to get it cleaned up and tuned.

-Gil

Re: WC Weekend Accomplishments....

#7

Ellis Walentine

Re: WC Weekend Accomplishments....

Ellis Walentine

>Sorry about your father, Dennis. I wish him the best possible care for his condition. We just learned that a dear friend in her 40s has been diagnosed with stage-2 breast cancer, so we're pretty upset about that.

Now that I'm home again, I can confess to getting away for a week (on a trip we had planned a long time ago), and what a week to get away! Luckily my snow plow guy (as in front-end loader) was able to dig out our housesitter before she starved to death here in Hidden Valley.

Yesterday, I treated my Valentine to a home-cooked meal and a bottle of dry champagne. Today, it's back to the business at hand, Presidents' Day notwithstanding.

Ellis

Re: WC Weekend Accomplishments....

#8

went to the MWTCA meeting in MN

Bruce, a MN Galoot

>and met a bunch of great guys - Dean Jansa, Mike Siemsen, Wayne Anderson, Gary Bruns. Got a couple new (to me) tools and had some fantastic conversations.