Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Drill press bearing replacement

Posts

Drill press bearing replacement

#1

Doug in Seattle

Drill press bearing replacement

Doug in Seattle

>My Delta 12" benchtop drill press (Model 11-990) rattles loudly and I think it is a bearing problem. I have the owners manual but, no instructions on bearing replacement. It is pretty straight forward? Any advanced warnings?

Re: Drill press bearing replacement

#2

Its often the splines....

John in NM

>If the rattle is worse under the load of a large hole saw or the like, I've found that its often the splines. You'd see a lot of chatter in the cut too, if you try one of those huge fly cutter like rossette things (though they chatter anyway, but it'd be almost unbearable with a loose spline).

No solution that I know of, they make them loose for fast production, figuring most users will not notice when using twist drills - which is more or less correct.