Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

wooden counter top

Posts

wooden counter top

#1

wooden counter top

lee beeden

>i have just finished gluing up two 12 1/2" slabs to make a counter top.

both slabs were built out of 3/4 to 1 1/4 wide strips so there is a lot of glue(tightbond 3)

i build them this way so both slabs can go through the thickness planer

now its time for the finish?

any suggestions?

i know wood has its issues around a sink,

any suggestions welcomed

Lee

Re: wooden counter top

#2

mineral oil

paul in AZ

Re: wooden counter top

#3

JL

What wood?

JL

>I've used mineral oil on many a rolling pin and cutting board. I've also used a mixture on mineral oil and beeswax.

Re: wooden counter top

#4

how do you intend to use them

Bill Tindall

>How to finish will depend on how they will be used. We have two "butcher blocks" on each side of the stove that get used daily for food preparation, bread making and occasionally for cutting up a lamb or deer. In this case the "finish" is largely provided by the oils from bread making, supplemented as needed by what ever cooking oil is handy at the time. Because they are used daily they look like used butcher blocks and we don't try to hide that fact with some "furniture" finish.

At the other extreme is wood counter top whose purpose is to give the appearance of a new butcher block, but it never is used as such. In this case I would varnish with a durable varnish.

Re: wooden counter top

#5

Re: wooden counter top

Sven

>Initially, I'd use a GOOD tung-based teak oil (like Daley's Teak oil) the after curing, follow up with a beeswax/mineral oil mixture that i'd buff off after drying.

Maintenance consists of re-applying beeswax/mineal oil mixture on a regular basis.

Sven

Re: wooden counter top

#6

Lacquer

Fred

>for a bathroom sink, I successfully used spray-on lacquer.

Re: wooden counter top

#7

Make it WATERPROOF

Dave Bair, Eaton Rapids, MI

>Use the toughest poly you can find and put multiple coats on the top, sides and bottom. A recent thread dealt with the various brands of heavy-duty poly.