We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>With all my own frustrations and comments from others regarding the poor quality standards of plywood, I recently made this platform bed using all solid wood frame and panel joinery. Worked extremely well and it was a pleasure not to have to deal with the non uniform aspects of plywood which one could have used for the interior/secondary wood panels.
This bed was "king size", therefore requiring multiple sections. The 72" drawers slide all the way through accessible from both sides.
>Bill, that is way to nice to put a mattress on. Where are you going to sleep? As far as plywood is concerned, I have used it, and might use it again in some future project, but it would be my last choice.
>Really, really nice piece. The attentiohn to details takes the piece up a notch or two.
Nice thing about working with solid wood is that you can make the stock whatever dimensions you want. And YOU get to pick stock for your show faces.
The sapwood in the middle of the panels gives them a curved appearance - at least in the photos. Finding flecked WS oak for most of the show faces must've been fun - but kick the piece up yet another notch or two.
Is the inlay near the corners done to disguise the corner being two pieces of oak. Hides the joint line without interrupting the flow acrossed the front.
Is the dovetail at the top "key" also a dovetailed spline connector as well? That would kick things up yet another notch or two.
Are the drawer panels cedar? Add another couple of notches for them.
Real half blind dovetails, not through DTs with a drawer face overlay - up more notches/
Mitered corners for the top panels frame - click, click - more notches.
If the fit of all the raised panel doors are as good as the one shown in the detail shot - put a few more notches on the Nice Gauge.
Though, because the top overhangs the drawer faces and pulls that stick out from the face of the drawer would work - the mortised in pulls are a nice touch and go well with the look of the overall piece - stack another few notches on.
Getting all the woodworking details this nice is quite an accomplishement. Getting a finish that's nice as well - well that pops the piece up into the Really, Really, REALLY Nice realm.
You know what you're doing, from design, to wood selection, to making and assembling the parts and finishing everything in an understated way - avoiding the temptation to FUME the oak - and going with a pleasant understatement - showing off the wood in its beauty.
The "corner" cherry inlays with the shadow lines were installed for two reasons, one as your said to mask the joint between the head and side boards but more importantly to mimic the detail of the sliding "keys" in the middle sections.
The middle "keys" are only dovetailed on the top as seen, the attached verticals are straight tongued into the oak sides with relief cuts to create a shadow line. This system restricts movement in both directions, side to side and front to back.
Yes the bottoms are solid 5/8" thick aromatic cedar panels, unfinished.
The mitered corners are loose tenoned and secured with wooden pegs on the underside.
That's what the clients said as well, much too pretty to cover up with a mattress, but I helped them move their mattress on it after delivering, and they slept well.
>There are a number of good reasons to post a picture here on this site rather than some other place.
1. It is trivial to do and now we can post multiple pictures. So there is no impediment to do so.
2. Ellis has size limits. This restriction is a great benefit to those that have slower internet connections. I don't try to open pictures on off-site locations because they often are huge and it takes more time than I have to load them.
3. If the picture is posted here it is archived here forever. So if someone wants to look at a post years from now the picture will be available.
Really, really nice! I've always thought the space under a bed is wasted and a solution like yours is so practical. Love the way you fastened the sections together with custom dovetail keys. That makes it so much easier to move if necessary. Our four dogs saw the photos and want one now! Not that they need any enticement to sleep on the bed .
Thanks for making the pictures on your web site a nice size for us dial-up users. But, as Bill said, often that is not the case and I just don't bother to try once I see how big the photos are.
Thanks for taking the time to post such nice work.
Yet my website is purposely set for user friendly dial up and quick downloads. Being a dial up user for so long (up until last year) I am fully aware of the pitfalls of assuming everyone can access with high speed.
Most of the photos on my website are below 50kb and can be accessed easily. There were more individual pics in this series than normal, ie 8, but putting this many of WC was a little daunting, and was easier to create a link.
The last pic that WAS posted on WC was missing from the series and decided to add as an afterthought .
Please Bill try the link and see if it works for you. Hopefully my website and pics will also be forever (ie my lifetime) available
I especially like the "keys for connecting the sections.
They remind me of the method the ancient Romans and Egyptians used to tie stone block courses together.
I finally had the patience and time to cruise your shop and projects and I am glad I did and it is not often I get to see a site that well laid out and
coordinated.
My wife likes the Ambrosia Maple with its streaked effect better then the Ash I used for Wainscots, I guess I should have looked here first ;-))
What do you think of the possiblity of goring yourself on a midnite run to the bathroom ,on a corner of that bed ?
>It takes two clicks to up load each picture to WC, one on "Bowse" and the second on your picture. With the new software we can upload as many as we want and put them in the text anywhere we want. I just did it for the coped frame post. This has to be less total effort than 500 people opening your web site to see them.
>"There are a number of good reasons to post a picture here on this site rather than some other place.
1. It is trivial to do and now we can post multiple pictures. So there is no impediment to do so.
2. Ellis has size limits. This restriction is a great benefit to those that have slower internet connections. I don't try to open pictures on off-site locations because they often are huge and it takes more time than I have to load them.
3. If the picture is posted here it is archived here forever. So if someone wants to look at a post years from now the picture will be available. "
There are many good reasons for mantaining a third party host site, which are too numerous to list.
That being said , how did you like Bill's Platform bed :-))
As far as midnight goring, I made the platform smaller than the mattress, so the mattress and covers create a small buffering. Still..... slightly rounding the corners would be a good.
The ambrosia maple wainscot was a fun project, especially resawing 6/4 and watching the bookmatching come to life.
>if you participate in several woodworking forums - and there are others - posting a set of pictures to each one - and some are Text Only - is a bit of a hassle. But posting ONE picture, and a link to a web page with additional pictures - perhaps also with explanatory text - makes it easier to share with more woodworkers - and maybe get suggestions or ideas that might make the next similar piece better.
>>...and a link to a web page with additional pictures...
Regardless of the pros and cons of local v.s. linked photos, note that you can embed photos from another web site directly in the message without the reader having to click on a link. This is a matter of typing a tiny bit of HTML code. For example, the photo below is given three ways, uploaded, embedded from another web page (Facebook), and linked to the photo on Facebook. Note that the permissions on the other site must be set to public access - I think they are on this Facebook page (if you don't see the bottom photo that means I don't have the permissions set correctly!)
Another thing you can do is embed a photo that has already been uploaded to WoodCentral in another message. Just copy the photo link with a right click and use the HTML code mentioned. This should save WC server space since the photo does not have to be uploaded again.
>Tried copying your message with Select, Cut and then Paste into a word document. Images didn't
come over and the html changed as well. Did screen captures to bring them over to the Word doc.
As for emebdding the url to an image that's on my site - by typing in the url with html code - there's a wrinkle to that. If you maintain a site with a few pages and images, the url of an image can be pretty short. With a larger site with sub directories and sub sub directories which make maintaining the site a lot easier - the url to a specific page or image file s a bit longer - and a lot more typing (Just checked - I've got 2,677 items on my site to keep track of)
>Charlie, I don't think I've ever typed a URL - it's usually too tedious since some of them are huge and too easy to make a mistake.
I always copy and paste - right click on a photo, for example, and the browser will provide an option to copy the link to the photo. ("Copy Image Location" in Firefox) To grab photos displayed on any page, you can also display the page as HTML and find the photo link to copy - this is handy on occasion since it will show you the formatting they used on the photo as well, if any.
Once you copy the link, just past it into your message and add the "img src" stuff, like I did for this one from one of your pages:
>I'm so used to Copy a web page's image and Paste into PhotoShop that I didn't notice the Copy Image Location option. Now that you pointed it out - it's right there waiting to be used. Well DUH! (sound of palm striking forehead).