Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

painting problem, need advice

Posts

painting problem, need advice

#1

painting problem, need advice

Bill Tindall

>The problem involves getting daughters house ready for sale (she is moving ).

The hall trim is luan (this spelling doesn't look right) stained nearly black with what appears to be some combination stain/varnish. There is very little build of the varnish part and it sands easily.

Trial 1 I sanded the trim and doors, wiped down with xylene and sprayed with Sherwin Williams oil based enamel paint, a light beige. Looks good for a few seconds and then the paint pulls away from the multitude of pores in this wood revealing the nearly black stain deep within. In the end the newly painted surface looks dirty. Second coat improves the situation but it will take at least 3 to look good.

Trial 2. Sprayed with thinned oil based Kilz followed by paint. The Kilz pulls away too. Still is going to take 3 coats, 1 Kilz and 2 paint.

Trial 3. Layed on the paint. Took forever to dry in this cool weather but 2 coats will do it. I think 3 thin coats will actually be faster.

Question: is there a product that will wet into the pores better such that I can get by with fewer coats? Would latex paint be better? I can't spray latex so I would need to brush it and brushed latex doesn't look nice like my sprayed oil.

Re: painting problem, need advice

#2

Clint Searl

Re: painting problem, need advice

Clint Searl

>Latex/acrylic semi-gloss trim would be the easiest and most reliable. SW, Behr, Valspar, and BenjMoore are all good for the job.

Clint

Re: painting problem, need advice

#3

Re: painting problem, need advice

John K Jordan

>I've always heard shellac is good for that, can be applied to most anything and most anything will stick to it. Would a coat of good shellac-based sanding sealer prepare the surface for painting? I've never used it under paint, only clear finishes.

JKJ

Re: painting problem, need advice

#4

Re: painting problem, need advice

Andy Wright - Allen, TX

>You might look into a "heavier" primer that is designed to fill imperfections (look for a primer designed to be sanded) - there are better primers than Kilz for that type of thing. You might try the Sherwin Williams poil based multipurpose primer.

Re: painting problem, need advice

#5

Re: painting problem, need advice

Glenn Madsen---in SF Bay Area

>My reaction, after three trials, is to replace the trim with primed and painted finger jointed pine. I then get to paint standing up, rather than on my knees, and success is assured.

Particularly when there is a time element to this project, I think something else needs to bend. My days and nights are donated, but not without cost...

Re: painting problem, need advice

#6

Re: painting problem, need advice

Al Stokka - Cambridge, Iowa

>Bill,

BIN (Zinsser) makes a shellac-based primer that might do the trick for you. No experience, here, using it. Just passing along the info.

Al

Re: painting problem, need advice

#7

Re: painting problem, need advice

pecker

>I wonder if there is sanding dust remaining in the pores, and the paint won't stick there.

Maybe skip the sanding altogether.

Re: painting problem, need advice

#8

JL

Re: painting problem, need advice

JL

>Lauan paints reasonably well with most of the latex paints that I have used.

I'm typically painting Lauan sheets in the theatre all of the time.

I've used gloss, semi-gloss and flat.

Re: painting problem, need advice

#9

Re: painting problem, need advice

Chuck Kettler------WebKitFormBoundaryGtGMIWw+v6KCP

>Porter Paint makes a primer that will stick to just about anything, especially prefinished trim. The trick is to not sand before priming.

Try Flotrol to thin out the latex and make it flow better.

Re: painting problem, need advice

#10

2nd the shellac

John in NM

>Easy to do a test patch.