Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Do sanding mops work?

Posts

Do sanding mops work?

#1

Do sanding mops work?

jared

>Hello I have been making a lot of band sawn boxes. I am able to do a lot of the sanding on the curved surfaces on my 6x48 in belt sander by using the back side of the tensioning drum. It still leaves a lot of hand sanding that needs to be done to get the boxes looking like I want. I have been trying to think up some way to do away with some of the boring and time consuming hand work. I got a catalog from klingspor that advertised sanding mops. When I saw them I wondered if they would be suitable for what I want to do. Anyone have any advice on this or have used sanding mops for something like this? Thanks Jared

Re: Do sanding mops work?

#2

Re: Do sanding mops work?

Doug Ridley

>Don't know about mops but I LOVE my Sand-O-Flex. Google it up.

Re: Do sanding mops work?

#3

I second the Sand-O-Flex recommendation

Charles Yawn

Re: Do sanding mops work?

#4

Re: Do sanding mops work?

Mark Mandell - Gone Round In Jersey

>I've used them to brighten metal but I'm not sold on them for wood as they tend to take soft grain first and leave harder grain behind or leave ridges and grooves. An alternative would be smaller drum bits with abrasive sleeves on a flex shaft or Dremel.

YMMV :)

Re: Do sanding mops work?

#5

Re: Do sanding mops work?

Scott Crumpton

>I use the Klingspor MAC mops regularly in both 80 and 120 grits (10" dia by 4" wide) on a large 1725 RPM buffer motor. As Mark mentioned, they take the soft wood first, but that's exactly the effect I'm looking for. I call it "grain relief sanding." They're expensive and it pains me every time I have to replace one. I've got two products that wouldn't be possible without these mops.

I'm told that the finer grits (150-240) can be used to defuzz a surface between finish coats and are commonly used to sand moldings in production machines.

Re: Do sanding mops work?

#6

In my experience, No!

Lee Schierer McKean, PA

>I tried a flexible flap sanding attachment once and it did a good job in the beginning, but the exposed edges quickly wore out and the effectiveness diminished rapidly. There was still good sandpaper toward the interior, but it never touched the wood. Unless you could trim down the length of each flap you never got to the rest of the sanding grit.

I use various sized spindles and then hand sanding for the areas too small to reach with the spindles.

Lee

Re: Do sanding mops work?

#7

Re: In my experience, No!

jared

>I have a spindle sander and I do use it a lot for the smaller curves. Guess I will just continue the hand sanding and call it good at that. After all that isnt a bad way to spend your time, using your hands with out having to think much about it and listening to the Byrds, U2 or NPR. Thanks for the replies Jared

Re: Do sanding mops work?

#8

Re: In my experience, No!

Bill White

>U2, NPR??? You must be a liberal commie pinko just like ME! Now ya gotta know that I'm just pullin' your chain.

Bill

Re: Do sanding mops work?

#9

Re: In my experience, No!

Lee Schierer McKean, PA

>I prefer the Beach Boys, Four Seasons, Paul Revere and the raiders, etc...

Re: Do sanding mops work?

#10

Re: In my experience, No!

Bill White

>Lee, You're showin' your (my) age.

Bill :D

Re: Do sanding mops work?

#11

Re: In my experience, No!

jared

>Did you watch the WHO on Sunday? In a previous life I saw them about 40 years ago live. Amazing there are any survivors at all. Still fun to see the windmill guitar playing.

Re: Do sanding mops work?

#12

Rick L

Re: Ballon sanders

Rick L

>sound like what you want.

http://woodworker.com/sandboss-sb1750-sanding-drum-mssu-122-195.asp?search=pneumatic%20sanding%20drum&searchmode=2

www.industrialabrasives.com has what you want at a great price but their website doesn't do their site justice. Call them directly.

You can change the air pressure to work with the surface you want and vary the curve softness.