Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

woo hoo I did it!

Posts

woo hoo I did it!

#1

woo hoo I did it!

McKay

>I finally figured out how to get my profile back " border="0" alt="">

I have included a couch table that I did at Traditional Building Skills Institute at Snow college in Ephraim Utah. The table is made of cherry with smoked maple for the inlay. Leg tapers, mortises, tenons and bows were all made using hand tools. We even made our own plywood for the top.javascript:insertTags(":D"); Fun class for $300 bucks.

Re: woo hoo I did it!

#2

Re: woo hoo I did it!

Barry Irby

>Good Looking table. I really like it.

You have some stray bits and pieces in your post I don't understand, but I am not really computer litterate.

One question. What is smoked maple? (Can you tell us a little about it, how to make it etc.)

Re: woo hoo I did it!

#3

Re: woo hoo I did it!

McKay

>The instructor was Cris Gochner. He is a contributor to FW and instructor at Adams WW. He got the wood from somewhere in Salt Lake City. It is actually Maple that has been pressure treated somehow to give a nice brown color.

The stray bits of language I think are where I dragged a smiley over. I guess I did it incorrectly. I'm not sure how to use the little critters.

Re: woo hoo I did it!

#4

Re: woo hoo I did it!

FredD

>I like the proportions of the table ,very nicely done.

Smoked Maple inlays ??

FredD

Re: woo hoo I did it!

#5

Critters

Mark Mandell - Gone Round In Jersey

>Don't drag. Just put your cursor at the place where you want the graphic and click once, then click on the one you want at the left. You'll see a text bit inserted like ":" + "D" for the Big Smile. But it shows up as the graphic in Preview and the post. You can also just type the two symbols together after a space and you'll get . . . . :D

Re: woo hoo I did it!

#6

Re: woo hoo I did it!

Ellis Walentine, Host

>Nice work, McKay. The table too. :)

Ellis

Re: woo hoo I did it!

#7

Nice Table !

Don Orr

Re: woo hoo I did it!

#8

questions

Bill Tindall

>Nice table. Is the curved apron a bent lamination? How are the mortises done that accommodate the curved apron into the leg?

Re: woo hoo I did it!

#9

Re: questions

McKay

>The curved apron was first brick laid. (If you are not sure what this is, Steve Latta did a demilune table a few years ago using this method. http://www.finewoodworking.com/ProjectsAndDesign/ProjectsAndDesignPDF.aspx?id=24965) The cherry veneer was attached after shaping the curve with a radius plane. The tenons were laid out using the back apron. Because the size had to be the same, the back apron's tenons were cut and used as a template. The mortises were then cut in the front legs on an angle to match the straight tenon from the front apron. :D