Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Machining Corian

Posts

Machining Corian

#1

Machining Corian

Bill Houghton

>I'm hoping to get the time soon to make a floor cabinet for one bathroom - we need more storage. The house is a Victorian, and the bathroom has Victorian touches - small hex tiles, clawfoot tub, pedestal sink.

It occurred to me that a marble top might be nice, until I asked the tile shop for a rough price for a piece with an edge treatment and heard "Oh, about $200."

I'm now wondering if I can get a Corian sink cutout from a local countertop fabricator and shape it myself. I know the pros use special router bits - but, for a one-time job, can I use regular carbide woodworking tools like router bits and sawblades? It appears that's so from the little bit of googling I did.

Advice appreciated.

Re: Machining Corian

#2

I don't know why not.

Bruce, a MN Galoot

>I've cut the stuff on my table saw, cleaned up edges with regular carbide bits and turned it on my lathe with regular lathe tools. I would think the only difficulty would be joining two pieces and getting the epoxy to match.

It's not hard, just messy. I'll send you a pic of the aftermath of turning a small bowl.

Re: Machining Corian

#3

JL

Re: Machining Corian

JL

>One difficulty that arises from machining Corian is the dust and "shavings". You really want to keep control of it - especially when the weather is dry and prone to "static".

Re: Machining Corian

#4

Re: Machining Corian

Joseph Mulherin, Sr.

>I do not foresee any problems to you machining the corion for a top. Suggestion... if you have any room available to stack cabinets...think about using the kitchen cabinets available at HD. I did out front bathroom a few years ago and installed 24" wide cabinets that way next to the newly installed lavatory cabinet I also installed. Gives a finished component ready for the towels and other assessories in the bathroom.

Re: Machining Corian

#5

Yeah, it works, but...

doug f, san clemente, ca

>As noted, it makes a godawful mess and the dust gets into everything. Good dust collection and a mask are absolutely necessary.

Doug

Re: Machining Corian

#6

the mess

Bruce, a MN Galoot

>This is the mess from turning a little bowl, 3.5" across, maybe 1.25" deep.


Re: Machining Corian

#7

Re: Machining Corian *LINK*

Jim Dillon

>Bill,

As others have said, Corian works easily with standard woodworking tools, but does create a real mess. At least the mess isn't toxic or potentially irritating like MDF dust. At least I don't think it is, but who knows in this day and age :) . Here is a link that I came across when I was routing Corian several years ago. Follow the links within the article to get more specifics; the links still seem to be active and I see one of the sources offers adhesives if you want to add a backsplash, do inlay etc.

Jim


http://www.naturalhandyman.com/iip/infcountertop/infsolidsurface.html

Re: Machining Corian

#8

Re: Machining Corian

Bill White

>Just remember that, for a quick description, Corian is an acrylic product. Lots of static, dust, shavings, and possible scratching of end result.

Bill