Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Looking for a LEIGH FMT JIg - Experienced USER *LINK*

Posts

Looking for a LEIGH FMT JIg - Experienced USER *LINK*

#1

Looking for a LEIGH FMT JIg - Experienced USER *LINK*

charlie belden

>I've been working on an illustrated comparison of the LEIGH FMT and the Festool

DOMINO - for what seems like FOREVER. Now that I've gotten familiar with

SketchUp I finally have an adquate way to do the illustrations that hopefully

will semi-clearly show the procedures - and what can go wrong - with using

each of these "tools".

DISCLOSURE:

I have, and have used, the Festool DOMINO, on Real World projects

- but have no connection with Festool or any of their dealers.

I paid List Price for the DOMINO- and its accessories.

I had, and used, the TREND M&T Jig which works much like the FMT, albeit

not as precisely, or easily. So I have some familiarity with how the FMT

works - and what can go wrong using a jig like the TREND M& T and LEIGH FMT

router based jig.

Having disclosed my potential personal bias - I want to make a comparison

that's objective - in hopes that it will help a woodworker make a purchasing

decision since both "tools" are pricey.

With that out of the way, I'm looking for an EXPERIENCED FMT USER (not

just an owner who has used it a couple of times) to go through what I've

put together so far - and give me some feedback on this stuff - noting

things that are wrong, things that aren't included that should be and

suggestions on how to improve the comparison.

Any volunteers?

charlie b


Draft Comparison FMT vs DOMINO

Re: Looking for a LEIGH FMT JIg - Experienced USER *LINK*

#2

Re: Looking for a LEIGH FMT JIg - Experienced USER

Hikmet C. Sakman

>Quickly I'll point out one issue.

The only issue with FMT is when you need to reposition the workpiece (tenon) to cut a wider tenon. When you do this, no matter how much you fuss (this much fussing defeats the purpose, by the way.) router bit leaves a small step at the shoulders, which can be fixed by a table saw by simply re-establishing shoulder cheeks with a very light a very light cut.

Otherwise it works well, but Domino is much faster due to fewer things to consider when m&t operation is performed.

Chico

Re: Looking for a LEIGH FMT JIg - Experienced USER *LINK*

#3

Re: Looking for a LEIGH FMT JIg - Experienced USER

Texas Hoosier

>Charlie,

I've had a Leigh FMT for several years, and have been really pleased with it. I'll be glad to email with you about my experiences with it.

Clay

Re: Looking for a LEIGH FMT JIg - Experienced USER *LINK*

#4

Re: Looking for a LEIGH FMT JIg - Experienced USER

charlie belden

>Clay:

I'll definitely take you up on your offer. I want to do an accurate, objective and fairly thorough comparison with a Real World project

my e-mail address is

charlieb@accesscom.com

First - do you think the table leg and apron example, with its asymetric joinery, is a representative project for the comparison? If not, do you have a suggestion for a better example?

I've numbered each step of the FMT process - so referencing the step number if you have suggestions/comments/changes would be REALLY helpful

I've created a SketchUp model of the DOMINO and will be working on illustrating the process it'd use for doing the corresponding Loose Tenon mortises for the table and apron example project. It's going to be a little trickier to do since the DOMINO's workings are smaller and more compact. And of course there's its Metric Thing that needs some explaining.

Anyone else with FMT USER experience care to join in.

To clarify some things - what I'm trying to put together for my personal woodworking site - no commercial endevor, no article to try and sell - no free bees from any manufacturer - a good comparison of the FMT with the DOMINO. My hope is that the information helps a woodworker make an informed purhcasing decision - and not have Buyer's Remorse later.

Thanks for the help with this.