Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

>1 Feb 2010

Good Morning,

Happy February and yes, we have snow and ice...and enough snow to feed the family snow ice cream yesterday.

Nothing from me except I worked day and night across the entire weekend for the day job.

Pretty boring report eh?!!

That's it for me...so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

YUK! Inventory @ Work

Tom Rex in TX

Re: WC Weekend Accomplishments....

#3

Split An Insane Amount of Hickory

John McGaw

>I finally got around to renting a hydraulic splitter on Friday -- just in time for the worst winter weather Knoxville has seen in ten years. So I spent a lot of time wet, and cold, and sweating, and tired trying to finish off all of the log sections that I had moved down to my driveway from the side yard. I'm certain that there was at least two tons there with a few pieces pushing 200 pounds. Got it done anyway and all I have to do now is re-stack it in the proper location. But that can wait until it warms up a bit and all of the ice melts.

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

George@Colonel's Workshop-Havertown PA

>Goof Morning Dennis, and Happy Monday,

Its cold down here in the shop, and I am anxious to get to work under the modest heat of the the hi-hat lights. The passed weekend saw much more of the same activity. I was working as late as 10:00 last night applying minwax tung oil to two more--just completed--chess boards. Total of 5 for me, and another is in-progress for Charlie's wife. I have about shot the wad of quilted cherry and mahogany. Its great to use up scraps. Later in the week I will begin to make the drawered bases for 4 of them. My #7 son Jimmy wants his mounted atop a small table, which I'll make from either cherry or maple.

The weather curtailed travel plans for #4 and #5 sons, who remained in Virginia. Still, we enjoyed all those kids who could make it to the dinner party. Absolutely no trouble keeping the beer cold.

Have a great week, Dennis.

George

Re: WC Weekend Accomplishments....

#5

Almost Accomplished

Mark Mandell - Gone Round In Jersey

>An Irish friend called me to visit his new rec-room bar on Friday. Fortunately, he's only a few miles away so the air-fare was avoided (last minute tickets are pricey).

Naturally, he's got "keg-erators" set into his bar, one with his Irish brew of the moment (usually Harps), and the other with his American micro-brew of choice, and a nice tap where he can switch the draw. But

The rig sports only this little whimpy stock handle on the tap. Well, this won't do, so we decide that I'll turn a new tap handle. Saturday dawns and I cut several spindle blanks out of some 2" cherry, get them round, set the coupling nuts into the mounting ends, and take them over for size.

Then dawns the big idea... We'll top each handle with the two families' respective coats of arms from Ireland. As they have examples already framed, I get the big Nikon out, shoot them at macro settings, play a bit with digital enhancements, and then we print them in several sizes to try with the handles. We're doing two handles so that depending on which family is visiting, their respective arms will be on prominent display. I have suggested, however, that he put in a second tap to have both mounted all the time in case of surprise visits.

With the turnings done, all we have to do is embed the graphics in clear casting resin and mount them on the handles. A multiple disciplinary project from woodworking to photography to resin casting.

[Sorry, Colonel, Bud ain't on the menu]

Re: WC Weekend Accomplishments....

#6

Not a good weekend..

Mark Nowicki

>Found a Bosch 12V Max Pocket Driver for CDN$80 at my local Home Depot.

Took the older twin snowboarding on Sunday. On the first run of the day, at the very end of the easy run he caught an edge, and fell forward pretty hard. The way he got up, holding his shoulder I had a feeling it wasn't good news. The X-ray confirmed a broken clavicle.

Many thanks to the staff at Mt. Tremblant, Victoria of the Canadian Ski Patrol, and Doctor and nurse at Mt. Trembant medical clinic for their calm, efficiency and professionalism.

Note to self; always have triangular bandages and zip-lock bags in the first aid kit.

I feel like shit.

Mark

Re: WC Weekend Accomplishments....

#7

Hey Mark

George@Colonel's Workshop-Havertown PA

>I don't eat flowers of any age. ;)

George

Re: WC Weekend Accomplishments....

#8

Love to see pictures when you're done.

doug f, san clemente, ca

Re: WC Weekend Accomplishments....

#9

Don't feel so bad...

doug f, san clemente, ca

>I've been through two broken arms and a broken wrist and one concussion with my two boys. Don't let anybody kid you; snowboarding is a contact sport!

Doug

Re: WC Weekend Accomplishments....

#10

Re: Not a good weekend..

Barry Irby

>I have a friend whose brother was married to a gorgeous girl who liked to snow ski. He did not ski so he would take her to the mountain and sit in the bar and just hang out while she and her friends skied. One day, after a few adult beverages, he concluded that it couldn't be all that hard and after all, he had watched many times through the big picture window. He rented skis and launched himself down hill. Made it far enough to get up to a terrific speed. Took a hard fall and came up with a broken shoulder blade (clavicle?) and both arms snapped off right below the ball joints at the shoulders. He was in a cast with both arms sticking out in front of him at about shoulder height for weeks, if not months.

His wife divorced him, but not until he had recovered enough to wipe his own....well you know. I guess she deserves some credit for staying through the tough part.

Re: WC Weekend Accomplishments....

#11

Barb Siddiqui

Processing silver maple

Barb Siddiqui

>I spent the weekend alternating my time between the chain saw and the bandsaw, making turning stock out of 1/4 of our 100-yr. old silver maple, sadly broken down in the last wet snow storm. Sore back, cramped up hands, weekend warrior syndrome, and lots and lots of new green turning blanks. Running out of room for them, but smiling every time I enter the shop and have to weave my way through the stacks.

Re: WC Weekend Accomplishments....

#12

Extra Special Weekend

Carol Reed

>This past Sunday the small congregation voted to "call" me. In my church that means to make me their permanent pastor, as opposed to a Sunday to Sunday visit.

It is the ultimate accomplishment for a minister in my denomination. There is an official service and ceremony called ordination. It is scheduled for April 17 with the bishop and other 'church authorities.'

In short I am stoked!

As a plus, this is a part time position, leaving me time to make sawdust - much, much more so that if it were full time gig and a much larger congregation.

Hoist* one with me in my joy.

* a beverage, a chisel, a gouge, a screwdriver, whatever! :)

Re: WC Weekend Accomplishments....

#13

Re: Extra Special Weekend

John K Jordan

>A big congratulations! I imagine that now the real work (and responsibility) begins!

JKJ

Re: WC Weekend Accomplishments....

#14

Congratulations Carol !

Don Orr

>That didn't take long ;) I guess they know a good thing when they see it and didn't want to miss out on your "calling". Enjoy !

Re: WC Weekend Accomplishments....

#15

The Coats

Mark Mandell - Gone Round In Jersey

>These were shot with the D700 and 105G-VR Micro then color corrected in Lightroom 2.6.

Waiting on my friend to bring the casting resin. The Cherry will be oiled up with Watco cherry, sealed with SealCoat, then shot with cross-linked Enduro Super clear poly.