Tilting treadmill desk
Paul Cates - Henderson, KY
>Hi all,
Some of you might recall my questions last April about constructing a height-adjustable desk. I saw this one and thought that a reclining position would help alleviate some of the pain I was experiencing from sitting all day.
http://www.anthro.com/images/carls-table-ct03/SP_CarlsTbl03_MichaelM21.jpg
Thus my initial intention was to have the desk raise/lower/tilt, so I could stand, sit, or recline. Then I remembered reading a magazine article a few years ago about a guy who raised his desk, put a treadmill under it, and exercised while working. I liked that idea, but wanted the option of sitting or walking without having to move the treadmill, so building a floor around the treadmill seemed like the best option. Since treadmills are many different sizes, I picked up a used treadmill over the holidays before I built the floor.
For the desk, I used 500 lb. drawer slides for the up/down guides doubled in the front because of the weight towards the front when tilted, and also because the weight is focused on the pivot point. The linear actuators for the lift came from Firgelli Automation. I had fun building everything, but it was a lot of mental work attempting to figure out the design pretty much from scratch.
The actuator switches are on the floor because I removed a drawer unit similar to the one in the pic for a better view. I am happy with the results, but need to find a way to slow down one of the actuators since the front two do not raise at the same speed. The creaking noises in the videos are mostly because of that. I posted two videos on YouTube if you care to see the desk in action.
http://www.youtube.com/watch?v=G2XWPhP7hSw
http://www.youtube.com/watch?v=xB5Dmbdsag0
I know the thing is probably overbuilt, but I�m no engineer and I didn�t want a bunch of computer monitors sitting in my lap.
Please ask if you have any questions.
PC
P.S. A big thanks to Ellis, all the volunteers, contributors and donors for making this place possible!





