Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Batteries on a Dewalt 18 V ?

Posts

Batteries on a Dewalt 18 V ?

#1

JL

Batteries on a Dewalt 18 V ?

JL

>So, I tried charging the battery. It went from blink, blink, blink to a rapid blinkity, blinkity, blink.

After messing with a while, I plugged it in and tried to charge it again. It seemed to charge really fast. No charge at all. Yes - I have used Battery Rebuliders (now known as MTO Batteries).

The following questions:

Should I get a new battery rather than a rebuild? The cost difference isn't that much - $45 plus me shipping them the battery versus $60. With one I have to pay shipping both ways and the other I don't.

Given the age of the tool (8+ years) - should I consider replacement of the tool rather than replacement of the battery?

I have another aging battery for this drill - eventually it is going to go - that's why the questions.

TIA

Re: Batteries on a Dewalt 18 V ?

#2

Re: Batteries on a Dewalt 18 V ?

Grant in Iowa

>Jl,

If you talk to a tool repair specialist, they'll likely tell you that the older drill you have is superior to new models.

I have been down this road several times myself. Here are the options as I see them:

1. buy new battery or batteries or rebuild. I like the rebuild option, as they claim that the cells used are superior to OEM parts. If you have a local batteries plus or interstate batteries store they might do it for a lower cost than shipping them off.

2. Buy another tool that shares the same batteries...often more cost effective than above. Suggest impact driver or recip saw or circular saw depending on your needs

3. Buy a totally new drill or new drill kit.

4. try to rejuvenate the batteries you have by researching the subject on the web. search on nicad and dendrites and read up. Make sure you take safety precautions and such before you try this! If you aren't knowledgeable about electricity and don't understand positive, negative, voltage and amps then DON'T try it... just buy some new ones instead.

Re: Batteries on a Dewalt 18 V ?

#3

Re: Batteries on a Dewalt 18 V ?

John K Jordan

>If you have the battery packs that come apart with screws, you might be able to determine which cel(s) are bad. It's often just one. Might even combine good cells from two ailing packs.

Are they still under warranty? The rep told me they all have a 3-year warranty.

I once found a promotion with a new drill and two battery packs for cheaper than I could buy two battery packs! That's one reason I currently have way too many Dewalt cordless drills.

Another thing - we used to repair nicad cells at work with a jolt of current (vaporizes "whiskers" that cause internal shorts) from a bank of capacitors. Hadn't tried this for many years, but not long ago we zapped some of his battery packs with a momentary contact between the terminals of my arc welding machine. Last I heard this fixed his batteries.

Ralph, if you're lurking, let us know if it was a long-term fix.

JKJ

Re: Batteries on a Dewalt 18 V ?

#4

Re: Batteries on a Dewalt 18 V ?

Andy Wright - Allen, TX

>I the same situation last year, and was planning to buy a pair of Dewalt 18v XRP batteries (retail around $120). However, I was lucky enough to find an 18v drill kit at Lowes that was a "discontinued" model marked down to $129 so I bought it instead. Getting an extra charger + new drill for $10 was a deal I couldn't pass up.

The good thing with Dewalt is that all of their 18v stuff is compatible since they dont change battery packs every couple of years

Re: Batteries on a Dewalt 18 V ?

#5

Re: Batteries on a Dewalt 18 V ?

del schisler

>go to this web site and watch the vedeo's and see if you want to do it I have done that to lot's of battery's It has worked Also a friend has a construction buss. and has done that to lot's of his battery's It does work c/p

http://video.google.com/videosearch?hl=en&resnum=0&q=zapping+drill+batteries%5C&um=1&ie=UTF-8&ei=eu1gS52DOc2OlAfQ6ZXkCw&sa=X&oi=video_result_group&ct=title&resnum=4&ved=0CBwQqwQwAw#

Re: Batteries on a Dewalt 18 V ?

#6

Re: Batteries on a Dewalt 18 V ? *LINK*

Don Orr

>I have had very good luck with having batteries rebuilt by MTO Battery. Just got 2 done for an older Rigid drill for a total of about $70. They are only 12 volt though. One battery plus shipping both ways is a tougher call. I also had 2 VERY old Porter-Cable batteries rebuilt by them a few years ago for which the replacements were no longer available. Still going strong. Turn around time was about a week.


MTO Battery

Re: Batteries on a Dewalt 18 V ?

#7

I'm with Grant.....

Terry Alexander

>I have so many drills (and hunting spotlights, deer feeders, etc). I have my batteries rebuilt by MTO Batteries (no affiliation...but they're great!). Yes, the batteries they send back are far superior to OEM batteries. Like another post here, I could get another drill, batteries, and charger for < $20 for what it cost to have the batteries rebuilt. But...I really really really do have a lot of cordless drills, so rebuild is where I go.

HTH

Terry Alexander in West Texas