Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Kudos to Rockler for Bench Cookies

Posts

Kudos to Rockler for Bench Cookies

#1

JL

Kudos to Rockler for Bench Cookies

JL

>A. They hold a work up a comfortable distance from the bench.

B. They grip reasonably well - I used them to hold up my seat blank while grinding and sanding.

C. They are light weight and quite portable.

D. They leave no marks.

E. If you have a 50% off coupon, they are quite inexpensive.

Re: Kudos to Rockler for Bench Cookies

#2

Re: Kudos to Rockler for Bench Cookies

Gary Smyth

>If you live near a hockey rink you can likely negotiate as many used hockey pucks as you like for $1.00 or less each. If you don't like the way they stick, spray adhesive some "knobby" drawer liners to the bottom. Much less expensive and they provide identical function.

Re: Kudos to Rockler for Bench Cookies

#3

Re: Bench Cookies

Mark Mandell - Gone Round In Jersey

>I make mine from 3/4" scrap with a 2-1/2" hole saw or other shapes as needed, a bit of knobby rubber, and some contact cement.

Re: Kudos to Rockler for Bench Cookies

#4

Update

Gary Smyth

>Check ebay. Used Hockey pucks. 50 for $35.00 at this posting.

Re: Kudos to Rockler for Bench Cookies

#5

4 Out Of 5 Ain't Bad

Dave's Not Here

>I have recently seen some reports that if you leave your work sitting on the cookies too long they will leave a circle mark. Not sure why that is but on the bright side the marks are also said to be removable.

I also make my own for about 50� each.

Re: Kudos to Rockler for Bench Cookies

#6

Re: Bench Cookies

J.Roberts

>If you have to finish both sides of a workpiece, I made mine from some leftover 2 inch dowel. I cut the dowel into 1/2 inch pieces, drove a small finishing nail in the center of each, leaving about 1 inch sticking out . Cost, about the price of 20 finishing nails.

Re: Kudos to Rockler for Bench Cookies

#7

Fine  For Chair Legs

Mark Mandell - Gone Round In Jersey

>But I wouldn't want nail points and scratches in a finished surface.

The textured rubber does tend to loose its grip when it gets "filled" with fine dust, but washes off with a little water. Biggest issue is that these things are not great if you're moving the piece around because then you have to move the pucks as well. For that I use a piece of old carpet foam padding.