Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Considering switching shop over to a Festool shop

Posts

Considering switching shop over to a Festool shop

#1

Considering switching shop over to a Festool shop

Rik, WI

>Greetings everyone,

Over the past years I have increased my Festool collection to the point of seriously considering doing away with my large cabinet saw, mortising machine, Delta DJ-20 and others. I would keep router station, bandsaws, sanding stations and my lathes. I find for me personally I am able construct flat work much more efficiently using the Festools.

It just so happens I am in the middle of reorganizing my shop. I've included a shop layout I was going to move to prior to having this "aha" moment. Making the switch would allow me to enlarge my wife's craft room and the family room. By my calculations the selling and acquiring of replacements would be a wash.

Before I go off the deep end, I would like to know if anyone else has pursued this path?

Rik


Re: Considering switching shop over to a Festool shop

#2

Re: Considering switching shop over to a Festool s *LINK*

Jesse Cloud

>Try the festoolownersgroup.com forum. This topic comes up pretty often and a few people have done it.

I'm real close to losing my tablesaw, but I'm gonna keep the jointer. Agree with you about the bandsaw and router table.

Otherwise, Festool seems to do everything else better and safer. The big iron stuff just isn't carrying its weight any more and I sure could use the space.


Festool Forum

Re: Considering switching shop over to a Festool shop

#3

Say What ? ? ?

Barry Turner

>I really don't know how you can make a shop more efficient by eliminating your cabinet saw, jointer and lathe(s) in favor of handheld power tools, regardless of brand or quality.

I guess it all depends on how you define "efficient". A shop with a Skilsaw and a couple of sawhorses could be very efficient, although somewhat limited in versatility.

Re: Considering switching shop over to a Festool shop

#4

Re: Considering switching shop over to a Festool s

Andy Wright - Allen, TX

>I am a fan of Festool, but personally I don't think I could give up the speed of the tablesaw for rip cuts. Depending on what you typically build, I could see that its possible to build most things without a tablesaw, but I doubt that there are many projects that you could build faster than a guy in a "full shop".

This reminds me of a bout 15 years ago when I looked at a Shopsmith (I was first starting woodworking), The advice given to me by someone with more experience was "if you have no other choice buy a Shopsmith, but all time you will spend making the various set-ups will drive you crazy. take your $3,000 and buy individual tools"

I have never regretted not buying a Shopsmith, and if a new woodworker were to ask me whether to buy a complete "Festool system" or a contractor saw, router table, jointer and planer I would advise him to do the latter.

Re: Considering switching shop over to a Festool shop

#5

Re: Considering switching shop over to a Festool s

Rik, WI

>Thanks for the input. I believe I will continue with my traditional shop and add various Festool items to complement it.

Re: Considering switching shop over to a Festool shop

#6

Both is a nice option

Simon St.Laurent - Dryden, NY

>I do use my Festool tools for pretty much everything I do in flat cabinet work, and I agree with your original post that I'd keep the bandsaw and router table regardless.

Because I have the Festool saw system, I find I can use a much smaller tablesaw setup, which is a blessing in my basement.

The one part that seemed strange to me was losing the jointer and planer. I can't imagine doing that except in a shop that only did plywood.

Re: Considering switching shop over to a Festool shop

#7

Re: Considering switching shop over to a Festool s

Don at Central Illinois

>I wish someone with more experience had talked me out of the Shopsmith. I wanted it mainly for the lahte, and now that I have a better lathe, I can't seem to sell my Shopsmith. It worked for what it was intended, light hobby use, but not what I need. Oh, well, I'll sell it eventually, or give to my kids.

Re: Considering switching shop over to a Festool shop

#8

Re: Considering switching shop over to a Festool s

Barry Turner

>That sounds like a good compromise. From what I've heard, Festools are very high quality, but still not a substitute for traditional large tools like tablesaws and jointers.

Re: Considering switching shop over to a Festool shop

#9

Re: Considering switching shop over to a Festool s

Pete Peel

>I too am considering a similar action, only I was only thinking I would replace my tablesaw. I don't know anyone around me to talk to about the track saw, MFT, etc... though so I'm holding out until I see those things in action for myself. My reason for doing so would be for space savings and portability,

Pete

Re: Considering switching shop over to a Festool shop

#10

Re: Considering switching shop over to a Festool s

Dan Donaldson

>I could never get rid of my tablesaw. It is the only truly flat surface in my shop ;) If I got rid of it, I would not have a good assembly table anymore.

Re: Considering switching shop over to a Festool shop

#11

Re: Considering switching shop over to a Festool s

john lucas

>Can't imagine giving up my table saw but I trying to figure out a way to get the Festool miter saw and sell my radial arm and current miter saw. It will easily outperform both of those but unfortunately is 3 times what I will be able to sell mine for.

Re: Considering switching shop over to a Festool shop

#12

Re: Considering switching shop over to a Festool s

Bill White

>Are ya gonna take a bath on all the existing tools?