Sculpture Stands Finished *PICS*
Mark Meier (Ann Arbor, MI)
>I finished the sculpture stands I�ve been working on. These are used to support the piece as it's being sculpted. I do figure sculpture in clay and need to move around to view the model from all sides - thus the rolling stands.
I had a few previous posts related to this project:
Easy Way of Cutting a Perfect Hexagon?: http://www.woodcentral.com/cgi-bin/messages3.pl?read=398144
Help Cutting Compound Angles: http://www.woodcentral.com/cgi-bin/messages3.pl?read=401721
Need More "Open Time" for a Tricky Glue-Up: http://www.woodcentral.com/cgi-bin/messages3.pl?read=406405
Thanks very much to those that offered suggestions. Ed Mulligan provided the technique I used to cut the hexagons. Grant in Iowa suggested using Weldwood to get more open time during the glue-up. It worked great. I kept my shop at 50 degrees then put the clamped up pieces inside the house next to a heater:
And special thanks to my friend Bob for helping me get everything assembled! I was trying to use band clamps and failing miserably. He suggested using rope on the rails and twisting from the center. This cinched things up very nicely.
The stands are made from quarter sawn white oak. The lower and mid shelves are made from melamine. The tool tray and top are made from MDO and plastic laminate. The finish is wipe-on polyurethane.
One of the stands is different. It�s designed to hold my laptop and a Wacom monitor: http://www.wacom.com/cintiq/index.php?gclid=COr6gc-RrZ8CFQNSagodx1-F0Q . I�m also using the program ZBrush to sculpt: http://www.pixologic.com/zbrush/features/01_UI/
Mark





) I've made. Most of them are on wood - I guess that's the woodworking content...



