Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Another Honda Question OT

Posts

Another Honda Question OT

#1

Another Honda Question OT

Barry Irby

>On my 03 Honda CRV the windshield wipers Act oddly. Sometimes they stroke an even and consistent distance. There is a faint line on the windshield that indicates the normal limit of the stroke on the drivers side. Sometimes they stroke completely past the line and perhaps off the windshield. On those occasions they stroke lower at the bottom of the stroke as well. This might be a stroke or two and then there are a couple of normal strokes and then back to the wild ones. I thought it might be one on and one off, but its not It appears to be random. I am concerned they may go far enough to damage themselves or the car. Any thoughts? What could be loose? Could this be electrical?

Re: Another Honda Question OT

#2

The first thing I'd check

Bill Houghton, Sebastopol, CA

>is how the arms fasten to the pivots. On most cars, the pivots and arms are splined, and held on somehow, but if the "somehow" has gotten loose, the arms could be flopping around on the pivots. I'd address this fairly soon - if they are loose, you could be wearing the splines out. Not a big deal on the arms - you can buy replacements to put on - but worn splines on the pivots probably mean pulling the dashboard apart to get to the wiper mechanism.

Your local library will have Chilton's or Motor manuals that describe how the arms are held to the pivots.

Re: Another Honda Question OT

#3

Good Thought, ....

Barry Irby

>And I will check them to see if they are loose on the posts, but I think they are working in tandem and both flop around the same amount if that makes sense. If one spline is wearing and the other is not then they would move differently. Of course this would test my skill of observation. Don't want to run over somebody because I was looking at the wipers and not the road.

Re: Another Honda Question OT

#4

Re: Good Thought, ....

Gary Evans--Tallassee TN

>Hey Barry,

If the wipers are overshooting the mark in tandem, then the problem will be in the linkage, probably where they attach to the motor. I'm not familiar with the Honda's but the grill right in front of the windshield can usually be removed to access the business end of the wiper motor, as well as the linkage.

Gary

Re: Another Honda Question OT

#5

Re: Good Thought, ....

Stuart Hough

>You beat me to it!