Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Farm duty vs. standard 1/2hp motors?

Posts

Farm duty vs. standard 1/2hp motors?

#1

Farm duty vs. standard 1/2hp motors?

Joe Pack

>I am looking at a 1/2 hp Leeson motor. An eBay site has two, both TEFC 1725 rpm, 1/2hp, 56C mount, continuous operation...One is a "farm duty" while the other has no designation. The farm duty motor is $36 cheaper than the other, but the eBay blurb indicates that the farm duty "...is a better motor..., but cheaper..." with better insulation, vibration resistance, etc. I can't tell them apart in the pictures.

Is this claim true? What is the difference between farm duty and a standard 1/2 hp motor?

Re: Farm duty vs. standard 1/2hp motors?

#2

Re: Farm duty vs. standard 1/2hp motors?

Charles in Mtl.

>probably the bearing quality is better as is the amount of copper in the windings.

Re: Farm duty vs. standard 1/2hp motors?

#3

Re: Farm duty vs. standard 1/2hp motors?

del schisler

>here is what i found on the farm motor Farm Duty, Capacitor Start Totally Enclosed Fan Cooled Motor, HP 1/2, RPM 1725/1425 The other motor may be open at the ends for cooling ? And maybe not cap. start? It would depend's what app. i was going to use the motor on I belive if it were me i would do the cheeper motor Cap start and run is the better motor my input del

Re: Farm duty vs. standard 1/2hp motors?

#4

Re: Farm duty vs. standard 1/2hp motors?

Neal in San Jose

>Farm duty indicates a motor that is suitable for a dusty, dirty, possibly damp environment. It will be TEFC (Totaly Enclosed Fan Cooled) with sealed (possibly double sealed) bearings. It will have oversized windings for high starting torque for hard-starting/full load starting applications and suitable for continuous operation. It will have a gasketed oversized conduit box and possibly have a slinger to keep crud from getting to the bearings and it may have a shaft extension on the fan end for hand cranking. Basically bullet proof - or at least B.S. resistant!!!

Re: Farm duty vs. standard 1/2hp motors?

#5

I was going to say

Bill Houghton, Sebastopol, CA

>that surely a farm duty motor is one that runs covered in manure. You said it better.

Re: Farm duty vs. standard 1/2hp motors?

#6

So for my lathe...;)

Glenn Madsen---in SF Bay Area