Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Loaning tools to the destroyer. *LINK*

Posts

Loaning tools to the destroyer. *LINK*

#1

Loaning tools to the destroyer. *LINK*

Keith Newton----Little Rock, Arkansas

>I loaned a little disk sander that I have been using about 7 years, to the painter who is finishing some of my work. When I got it back, the little 1.25" backing disk was only .75", and it only took him about one hour for him to do that.

It's really no big deal, I just wanted to see if I could still post after the changes.


http://web.mac.com/keithnewton/iWeb/Site/Home.html

Re: Loaning tools to the destroyer. *LINK*

#2

Re: Loaning tools to the destroyer.

Lee Schierer

>Yeah and that sandpaper you gave him smelled like burnt rubber... :D

Re: Loaning tools to the destroyer. *LINK*

#3

Tools, books, & . . .

steve mackay

>record albums ( vinyl ). Never, never, never.

Re: Loaning tools to the destroyer. *LINK*

#4

Missed Something Here

Mark Mandell - Gone Round In Jersey

>You loaned a tool to a tradesman who proceeded to use it the way most tradesmen do, as a wasting asset. But then you wanted to see if your could still post on the forum, and you attached a link to your lovely pedestal piece that I'm pretty sure you've posted before.

Keith, I'm trying to put those together and I'm not doing so well.

a) Are they related in some way that I'm too dense to get or

b) There's no connection and you're just testing the new software

Please quiet my tortured mind ;)

Re: Loaning tools to the destroyer. *LINK*

#5

Re: Missed Something Here *LINK*

Keith Newton----Little Rock, Arkansas

>Mark, I think what I posted was the Home-page to my site, which should lead to more of my work. Sometimes on these forums, when responses are all over the place, a newbie can give an answer to a question that might appeal to the questioner others with more experience. I thought it might help anyone who reads my contributions if they knew a little more about what I have done. I don't think I am very well known outside of my home state.


http://web.mac.com/keithnewton/iWeb/Site/Home.html

Re: Loaning tools to the destroyer. *LINK*

#6

Gotcha, I think

Mark Mandell - Gone Round In Jersey

>I know that on some forums people automatically post a link to their own website; some forums allow it, some frown on it as free advertising. Here on WC I'm used to included links having a direct connection to the topic of the post, so I hope you can understand my "huh?" to the link as having something to do with your painter and his/her trashing the sanding disk.

ps: I loaned my 4-1/2" disk to a tile guy doing my kitchen because he left his home and needed to trim the door jambs. After a lot of smoke and burned rubber, he handed my tool back with a 2" disk and backer plate. He commented that "the things don't last very long" so I showed him how to reverse the backer such that the grit was facing up to do the job without destroying the backer. Duh :\

Re: Loaning tools to the destroyer. *LINK*

#7

Don't know about the disk sander, BUT

Bruce, a MN Galoot

>that is some very nice work, Keith. Very nice, indeed!

Bruce

Re: Loaning tools to the destroyer. *LINK*

#8

Re: Gotcha, I think

Keith Newton----Little Rock, Arkansas

>Mark, You are right about not including the URL. I had forgotten about that, but since you mentioned it, I just re-read the rules. If I knew how to take it down I would, but didn't see how to edit at this point. Maybe Ellis or someone else can take it down.

Thanks for the tip about reversing the disk and pad. I had never though about that one.

Re: Loaning tools to the destroyer. *LINK*

#9

Re: Gotcha, I think

Dan Donaldson

>Don't worry about it. One time is no big deal and it isn't worth going back to edit it. Take care. (I also remember seeing that desk a long time ago and think it is awesome)