Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Any way to turn down the volume on text?

Posts

Any way to turn down the volume on text?

#1

Any way to turn down the volume on text?

Tim Greif - West of Chicago

>For some reason, everything looks kinda larger than life on the new board, at least compared to the old one. I can dial it down by changing text size in the browser, but that affects everywhere I go. Can we adjust the text size for this board only?

Re: Any way to turn down the volume on text?

#2

Disagree

Mark Mandell - Gone Round In Jersey

>I like the "easy-reader" font 8)

Maybe if you back off from your monitor a foot or two? ;)

Re: Any way to turn down the volume on text?

#3

Jason Roehl in Lafayette, IN

I'm with Tim!

Jason Roehl in Lafayette, IN

>The default size before was great, and it was consistent with all the other sites I visit, so if I wanted a different size, I could change it in my browser. Now, I would have to downsize it here, then re-upsize it once I browse elsewhere.

There could be worse growing pains, though.

Jason

Re: Any way to turn down the volume on text?

#4

Re: Any way to turn down the volume on text?

Brent Smith in Montreal

>I felt it was a bit large yesterday, but find I am getting used to it today. Like many other things, it grows on you.

Re: Any way to turn down the volume on text?

#5

My View

George@Colonel's Workshop-Havertown PA

>Good Afternoon Friends,

I like the new size because I can read it more easily using my old eyes.

George

Re: Any way to turn down the volume on text?

#6

Re: My View

Howard Norman

>I agree with George, the new font size is easier on these old eyes of mine. I am not the oldest regular on this site but I am up there at 75 years old.

h

Re: Any way to turn down the volume on text?

#7

Ellis Walentine

Can do, but not now

Ellis Walentine

>Tim, that is a simple CSS change that we can easily make if everyone agrees. We're up to our eyeballs in other changes under the hood right now and I can't be tweaking CSS at the moment. Let's put it on the unfinished business list.

Thanks for bringing it up. I noticed the difference, too, but it didn't bother me.

Ellis

Re: Any way to turn down the volume on text?

#8

Re: My View

JKJ in East TN

>I didn't like the size at first, but after a bit of use I think I like it better. I do wish the font was a TINY bit "bolder" for a bit more contrast. JKJ

Re: Any way to turn down the volume on text?

#9

choice is nice, BUT

Bruce, a MN Galoot

>I like it the way it is.

Re: Any way to turn down the volume on text?

#10

I'm with Mark, George, Howard & Brent

Tom Rex in TX

Re: Any way to turn down the volume on text?

#11

Re: Agree

David Hay @ Denver

>Smaller font please...or perhaps less space between the individual threads (e.g. decrease margins around separator lines)

David

Re: Any way to turn down the volume on text?

#12

Ellis Walentine

On the list

Ellis Walentine

>All input is valuable. Once we have all our server issues and other loose ends ironed out, I will consider the appropriate CSS changes.

Thanks,

Ellis

Re: Any way to turn down the volume on text?

#13

Right Onnnn!  Gray Power!

Mark Mandell - Gone Round In Jersey

Re: Any way to turn down the volume on text?

#14

Agreed

Rik, WI

>And my eyes aren't that old...yet

Re: Any way to turn down the volume on text?

#15

Me too!

Tom Pilsbury (Chicago)

>The new font is a vast improvement over the old. Much easier to read. Please keep it this way.

Re: Any way to turn down the volume on text?

#16

Aged Eyes

George@Colonel's Workshop-Havertown PA

>Remember Mark,

The total age of the eyes must be doubled, because we normally use BOTH at once.

George

Re: Any way to turn down the volume on text?

#17

Re: I'm with Tim!

Howard

>I agree. I find the layout uncomfortable to view. I my opinion it is vary amateurish compared to the old layout. Far from an improvement.

Re: Any way to turn down the volume on text?

#18

My ageing eyes like it!

Mac in Indy

Re: Any way to turn down the volume on text?

#19

Dale Lenz

Not a problem for me

Dale Lenz

>Appears to be about a font 12 or so, reads well.

Re: Any way to turn down the volume on text?

#20

hit ctrl and scroll wheel

fred in ct

Re: Any way to turn down the volume on text?

#21

or ctrl + or - if no wheel

JKJ in East TN

Re: Any way to turn down the volume on text?

#22

Maybe a font change would help, or be better

wilbur

>I sent this suggestion to Ellis before I found this thread, but I thought I'd toss it out here for discussion.

After spending the past couple of days reading through old and new threads, I felt that the new WC did not look as good as the old one. I think I know what the basic difference is. The default font for WC with the old software, on the computers I used, at least, was Helvetica/Arial. Now it looks like WC is using Verdana as the default font, which is wider, and I think is leading to the comments about how the posts seem too big. And after looking at many threads, I have to agree that the readability of WC is not as good as it was, primarily due to the change in font.

The main advantage of Verdana is that it was designed to look good at small font sizes, which was great if you used it for displaying email subjects in 8 point font in Outlook. One of the ways this works is that a letter in Verdana tends to be wider than a letter in other fonts. On a web browser, though, the fonts can easily be much bigger, and Verdana tends to look worse as the font size increases. The new version of WC looks great on my iPhone, but not as good on my laptop or desktop computers.

I think I have a very easy way to fix this, though: switch back to Helvetica/Arial for the default font. I've mocked up a segment of a recent post to show how that simple change makes the text look a lot better. I wanted to post it here, but automatic downscaling of larger pictures by the WC software distorts what I'm trying to show somewhat. (Note: this feature is actually a very good one, and I really like the downscaling feature of linked photos for readibility.) But if you use the following web addresses to my Flickr account, you'll see what I mean.

Here's a post by Wiley in Verdana, as it looks on the WC website now:

http://farm3.static.flickr.com/2780/4298881754_e86fb877fa_o.jpg

And here's the same post in the same font size, as it would look if Helvetica were the default font in WC, which is what it was in the old version of WC. For Windows users, Arial would look nearly identical.

http://farm5.static.flickr.com/4019/4298137079_c3b10f5635_o.jpg

If you look at the two images side by side, Helvetica/Arial allows the post to be read with a narrower window with the same word breaks between lines, and I think it just looks better overall. Besides, every other woodworking forum that I know uses Verdana as the default font, and this might be a way to make WC stand out, or at least look like it used to.

What do you all think?

Re: Any way to turn down the volume on text?

#23

Make it smaller, or at least optional

Pete

>My vote would be to make it scalable or just maybe one size smaller, but I'm only 48 and I wouldn't want to hurt the old guys feelings, or lessen their enjoyment ! :)

Re: Any way to turn down the volume on text?

#24

Re: Maybe a font change would help, or be better

Howard Norman

>To my eyes the present font looks better. As I switch back and forth between the two the present setup appears to have a larger font size on my screen which is easier for me to read. I realize that others may have different opinions.

howard