Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Freak microplane injury *LINK*

Posts

Freak microplane injury *LINK*

#1

Freak microplane injury *LINK*

JohnM in Mid Mich

>Scary thing happened last evening. Was using a coarse microplane sanding disk with my Makita random orbit sander to level a rough piece of cherry. All at once and without apparent cause or warning, the disk came off, flying at high speed, bounced off my belt, then back to my left hand on top of the sander where it sliced my thumb deeply (see pic below) then sailed on like a razor frisbee across the shop. Lots-o-blood. Has anybody else had one of these just fall off the pad?? I'm thinking 1) I'm lucky it hit the belt buckle, and not a few inches lower (or higher for that matter); and 2) if this can happen, even if only rarely, it is a product safety issue that should be addressed. I, for one, will probably not use microplane sanding disks again.

Be careful out there!


Warning: pic shows stitched thumb

Re: Freak microplane injury *LINK*

#2

Frank in Colorado Springs

Re: Freak microplane injury

Frank in Colorado Springs

>John, glad it wasn't worse as it well could have been. How is the disc attached to the sander? Velcro?

Re: Freak microplane injury *LINK*

#3

William Falberg

Re: Freak microplane injury

William Falberg

>Nobody cares about your stupid thumb, John. What we want to see is the tool that done it. You got pics of that?

Re: Freak microplane injury *LINK*

#4

Yes, Velcro.

John M in Mid Mich------WebKitFormBoundary5Ns+kOhG

>

Re: Freak microplane injury *LINK*

#6

William Falberg

Re: Freak microplane injury

William Falberg

>Have you filed charges for attempted murder yet? Surely that's what it was. Was that going at 10,000 RPM? On Velcro? Scary.

Yeah, you should make that thumb very public. It's not about your thumb either; it's about me, and my private parts, and all the little buckaroos out there.

Thanks for the warning.

Re: Freak microplane injury *LINK*

#7

Falbergsawco? Been Sued?

John M in Mid Mich

>Wow. Must have hit a nerve or something - not with the disc, but with my post. What is with the attack mode? Did "Falberg Saw" get sued for some injury to a user? Are you after me for some past hurt from a customer? Why don't you simply accuse me of misusing the equipment and be done with it? Maybe manufacturers are simply blameless by definition. My further research is interesting: I've found additional comments on review pages from users who have seen the same thing: the discs flying off the sander after a bit of use. One user suggests the metal warps under heat, causing the velcro to release. Says the disc flies across the shop. Oops! I bet "Falberg Saw" wouldn't sell one of those! On the other hand, perhaps if a user of the "saw" was injured, and warned others, additional injury might be avoided. I also note that it appears microplane may have discontinued this line. Maybe I know why.

Re: Freak microplane injury *LINK*

#8

Jim Rahbe, Bedford Texas

Must have cut off your funny bone :-)

Jim Rahbe, Bedford Texas

>John,

I don't know for sure, but I think he was joking with you. I took it that way.

Jim R.

Re: Freak microplane injury *LINK*

#9

William Falberg

Re: Falbergsawco? Been Sued?

William Falberg

>Whoa! John! Kidding! Sheesh. I meant every word, but not with all that baggage. I don't get out much and when I heard about that microplane thing I (probably over-reacted) got all my antennae up. I wouldn't sue anybody; I never been sued. But I think the warning should go out loud a clear. I was surprised that I didn't even know what a microplane was; like I was missing something fun. I guess not. Finally: I'm 68, aside from burning a hole in my left eye (minor vision problem now)from welding, I've never suffered a serious injury; only minor (lots of those). I think I owe it to "thinking safety". It's on my stickers. I take it seriously. I still ain't gonna kiss your stinking ouwwie .

Re: Freak microplane injury *LINK*

#10

What would Tom do?

Joe Pack

>Tom Sawyer, that is. Heck, ol' Tom woulda charged a nickel to show somebody HIS cut thumb.

Re: Freak microplane injury *LINK*

#11

Re: Freak microplane injury

davhamm

>I sure as hell would be sending those pics and story to the manufacturer. See what they say.