Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

>18 Jan 2010

Good Morning,

I'm glad to say that it's been much better weather here lately...at least on the cold temp side. It's been a little rainy but still it's been nice because the temps aren't sitting in the teens all week. Supposed to be around 62� F here today and I'm planning on being outside for a change.

Been a busy and steady week at the day job. Lots of stuff going on at work and I'm getting to enjoy some of the more advanced things we are working on. No pain? No gain as they say.

Spent the weekend working, playing music, attending church, and playing some games with the kids. It's so nice to spend time with my family. I love them greatly.

No woodworking for me this past weekend. I have 1 chair to repair for a lady at church with only 5 more to go. I guess we'll see how this "chair repair" stuff goes. If you have ANY advice as to repairs loose joints for dining chairs? Please chime in.

Well, that's it for me...so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

Ken Bellock (Houston, TX)

>Glued up the ribs for the torsion box that will be the fixed workbench/assembly table in my garage. The bench will wrap around an irregular wall, which is why there is a cutout. Next it needs to be mounted to the wall, then the top skin will be glued and nailed on, followed by a layer of 3/8" hardboard. The front and side will then be wrapped with an oak faceboard.


img

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Howard Norman

>No woodworking for me unless you count moving and stacking firewood. Getting ready for what could be a week of storms. Forecast is for snow all week with the possibility of a couple of feet of the white stuff. Spent yesterday afternoon with a neighbor trying to figure out why his furnace doesn't like to operate from his Honda generator. No problems with operating from the electrical mains but it short cycles with the generator. Voltage and frequency are OK from the generator. Sounds like some harmonics or spikes but I don't have a 'scope to check that out. He is trying to locally find a "black box" filter this morning. I hate to start building a filter without knowing what frequencies are causing the problem.

h

Re: WC Weekend Accomplishments....

#4

Re: Made Two More Chess Boards

George@Colonel's Workshop-Havertown PA

>Good Morning Dennis,

'Twas a good weekend, indeed. I put two more chess boards together, save for edge banding and final sanding. The effect of the sanding on my shop is sneezable. This will take awhile to get rid of. Watched the Favre magic deflate the Cowboys' hot air baloon. It wasn't much of a contest, but clearly the best team won. We had a small dinner party last night, and I picked up yet another order for a chess set. Once the five boards are done, I'll be spending lots of time in front of the lathe doing the figures. Have a fine week, Dennis.

George

Re: WC Weekend Accomplishments....

#5

Some repairs, skiing, flashed back 40 years

Mark Nowicki

>Friday, replaced some kitchen cabinet drawer slides with stronger ones.

We have been replacing our steel pots and pans with Le Creuset cast iron, and the old slides could not handle the weight.

Saturday, wanted to take the kids snowboarding, but the Honda ( that was blocking the Dodge) would not start. The positive battery terminal was corroded and finally gave up the ghost. By the time I walked to the parts store and did the repair it was too late.

Sunday went to Mt. Tremblant with my ski club. It was a relatively warm day, which at Trembant always causes heavy fog.

Visibility was about 30 feet. I missed a turn and ended up on a black diamond mogul run.

Applying the previous week's lesson ( turn on top of the bump) I managed to make down in one piece.

On the chair lift I noticed the name tag on the skis of the person sitting next to me.

The name sounded familia and, after a short conversation I found out that both of us last met in 1970, poolside, at Apapa Club, Lagos, Nigeria.

We were both teenagers at the time, just hanging out and talking about our futures. We are both originally from Poland. At the time her mother, a doctor and my father, a marine pilot, were working on contract in Nigeria. Those were, without a doubt, the best years of my life.

We live a few miles apart, and are both in the same ski class.

Mark

Re: WC Weekend Accomplishments....

#6

Re: WC Weekend Accomplishments....

Simon St.Laurent - Dryden, NY

>I got further along on creating wooden ends for some preformed laminate countertops, but that's looking harder and harder. (Factory edges wobble too.) Eventually...

The main thing I actually finished was a second handrail on our steep stairs so my 21-month-old daughter has something in addition to her parents to grab onto. One cut, a lot of sanding and painting, and installation.