Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Bubinga & Curly Maple Partners' Desk

Posts

Bubinga & Curly Maple Partners' Desk

#1

Bubinga & Curly Maple Partners' Desk

Hikmet C. Sakman

>This desk took a long time to design and built. 8 months to be exact, but i took the order back in July 2007. I've built 3 large pieces during the 8 months of having this desk in bits and pieces in my shop, so I am very happy to see the end of it.

Clients changed their minds too. Initially it was 11' long now just over 7'. Thankfully we eleminated 2 cpu towers (simply no room for them) and replaced them with 2 Asus eee's, or triple e's. They are like a laptop except they come with detached keyboards but no dvd drives. So that box in the middle of the desk is housing 2 slim dvd drives and 2 small drawers for nick-nacks.

Center cabinet houses the modem/router/power bar and cables. The end of the cabinet is a drawer and houses the all-in-one fax/printer/scanner combo, sitting on a puzzle box because the bottom of this unit is longer than the measurement I took, but I'm counting on technology to find a smaller and probably a better one. Nevertheless, that puzzle box does the trick until I remove the 1" high lip at the back of that drawer.

Photobucket

Photobucket

Photobucket

Photobucket

Curly maple drawer faces are bookmatched, yet in these photos, they look dramatically different, I guess due to the way they reflect the flashlight. In person, there no contrast like the way they appear.

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

cnd 6

Top is 7'5" x 52" at the widest point. Top is finished with tough, sprayed on 2 part varnish, the rest is rubbed on varnish.

cnd 5

Photobucket

Please ask any questions you may have.

Hope you enjoyed this unusual piece.

Hikmet C. Sakman

"Chico"

Re: Bubinga & Curly Maple Partners' Desk

#2

Re: Bubinga & Curly Maple Partners' Desk

Jim Dillon

>Chico,

What an eye-pleaser! And such a nice solution to putting two computers in close proximity to one another with room for storage as well. Bet it "hurt" to put those holes in the bubinga top for the monitor wires 8-). I'm sure your clients feel the wait was worth it. Thanks for inspiring me this morning.

Jim

Re: Bubinga & Curly Maple Partners' Desk

#3

Re: Bubinga & Curly Maple Partners' Desk

Matt Overton

>Chico,

This is a georgeous piece, and a stunning design!

Re: Bubinga & Curly Maple Partners' Desk

#4

Awesome as Always !

Don Orr

>Excellent flow and use of space. Efficient yet stunning. Beautiful woods too.

Re: Bubinga & Curly Maple Partners' Desk

#5

questions

Bill Tindall

>First, thanks for taking the time to post. It was an enjoyable journey to start my day.

I have never attempted to assemble a top that large. Both its size and the fact that it is not a rectangle must lead to some problems in gluing it up and sawing out the shape. Would you provide some details on problems you had to solve in assembling the complex top that are different from something like a rectangular table top?

I like bull nose edges and I have not settled on the best way to make them. How did you put the bull nose edge on the top?

The solid panels for the sides appear to be "post and panel".?. If so, how are the panels joined into the posts?

Re: Bubinga & Curly Maple Partners' Desk

#6

Chet Kloss

Bravo!! - As always...very nice solution.

Chet Kloss

>

Re: Bubinga & Curly Maple Partners' Desk

#7

Hey Chico....

Thomas Skaggs, Foothills of Mount Level

>....oh...now you are just showing off! Loads of nice little detail work. The drawer face sides are a nice touch. I think the cat puzzle is a nice touch too. ;-) Seriously, very cool my friend.

Tommy

Re: Bubinga & Curly Maple Partners' Desk

#8

Re:Desk - Perfection as always...

Ray Carson - Lawrenceville, NJ

>from you HC. Your designs and craftsmanship always astound me. LOVE the dovetails. Great idea too.

Ray

Re: Bubinga & Curly Maple Partners' Desk

#9

Question regarding the drawers

Terry Alexander

>Are the drawers "loose fit/floating" or do they have hidden slides on the bottoms?

Tks

Terry Alexander in West Texas

Re: Bubinga & Curly Maple Partners' Desk

#10

Re: Bubinga & Curly Maple Partners' Desk

Chen Lee

>Hi Chico,

Outstanding work! You have a great sense of design!

Chen

Re: Bubinga & Curly Maple Partners' Desk

#11

Re: Bubinga & Curly Maple Partners' Desk

Lynn Baker from chilly Glacier WA

>Chico,

You never cease to amaze me ! Your work just seems to get more and more impressive, both in design and craftmanship. The desk today and the one yesterday are really masterworks.

Great work my friend. It's been too long between exhibits of your work.

Thanks for making me envious once again.

Lynn

Re: Bubinga & Curly Maple Partners' Desk

#12

BarbS

Re: Bubinga & Curly Maple Partners' Desk

BarbS

>Another fabulous piece, Chico. I really like the way you cut the desktop to orient the boards' grain on a slant, one corner to another. This is a stunning piece, and I'm sure the owners are happy. Too bad on them changing the size during your work! I hope you charged big time for the alterations needed.

Re: Bubinga & Curly Maple Partners' Desk

#13

Gush, gush! Rave, rave! And a question

Joanne in Pt. Pleasant, PA

>Every time I start to say "Chico, this is my favorite piece yet! I don't think you could surpass this!"--You DO! This is wonderful! Everything about it makes me smile. The design, the wood, the little touches to make the computers barely noticeable--so cool.

Can you tell us about the system you have in the drawers for hanging files? At least, I presume that is what the bar is for. Is that a round rod? Is it moveable?

Re: Bubinga & Curly Maple Partners' Desk

#14

Re: Bubinga & Curly Maple Partners' Desk

Virgil Johnson

>Very nice work. Thanks for posting.

Re: Bubinga & Curly Maple Partners' Desk

#15

Re: Bubinga & Curly Maple Partners' Desk

Jennifer@Indy.USA

>Chico,

This is absolutely wonderful. I love it.

Jen

Re: Bubinga & Curly Maple Partners' Desk

#16

Answers

Hikmet C. Sakman

>Thank You Bill.

I have never attempted to assemble a top that large. Both its size and the fact that it is not a rectangle must lead to some problems in gluing it up and sawing out the shape. Would you provide some details on problems you had to solve in assembling the complex top that are different from something like a rectangular table top?

I like bull nose edges and I have not settled on the best way to make them. How did you put the bull nose edge on the top?

The solid panels for the sides appear to be "post and panel".?. If so, how are the panels joined into the posts?

I had 4 matching (flitch) bubinga boards, 16" wide and 12' long each.

So, they were glued in pairs, then sanded in thickness sander and then they were glued again. I made a templete of the entire top from 1/2" MDF. Tweaked it here and there, cut to size and shape and then I used it to cut the actual top. I also located the mounting holes for the box on top, as well as cable hole locations on MDF, flush cut the actual bubinga top from it.

Panels are all veneered 3/8" Baltic birch, rabbetted and in between grooves made in the legs. Yes, they are curved grooves as well as the printer drawer front. The section above that drawer is glued to the frame. That panel is 3 layers of 5/16" bendable plywood, laminated on a curved form in veneer press.

Lastly, I used a 2-1/2" dia. bullnose bit chucked on DW 625 and fed handheld. ROS took care of the rest. Edges are also treated with 1/2" radius half-round cutter for the underside.

Chico

Re: Bubinga & Curly Maple Partners' Desk

#17

Re: Hey Chico....

Hikmet C. Sakman

>I gave you the heads-up at the end of the first desk posting. I think I was fair to you Tommy! ;-)

Chico...

Re: Bubinga & Curly Maple Partners' Desk

#18

Answer regarding the drawers

Hikmet C. Sakman

>Yes, they look floating because they are on Blumotion slides.

Re: Bubinga & Curly Maple Partners' Desk

#19

Re: Bubinga & Curly Maple Partners' Desk

Hikmet C. Sakman

>Thanks Lynn.

I wish you come dow from that frozen hill to the warmth (!) of Victoria to visit.

Thank you for your kind words and I'll try to post more often.

Chico.

PS: Nobody thanked me before for making them envious, but then again I wasn't aware that I made anybody envious before either.

Re: Bubinga & Curly Maple Partners' Desk

#20

Re: Bubinga & Curly Maple Partners' Desk

Hikmet C. Sakman

>Thanks Barb. I haven't paid for this yet, hopefully this weekend and I'll take your advise!!!! ;-)

Chico

Re: Bubinga & Curly Maple Partners' Desk

#21

Re: Bubinga & Curly Maple Partners' Desk

George@Colonel's Workshop-Havertown PA

>Good Afternoon Chico,

Truely the marriage of exquisite craftsmanship and space age cybersuperiorotta! Gawd, you rock!

George

Re: Bubinga & Curly Maple Partners' Desk

#22

My only complaint...

John E in SC

>Your clients SERIOUSLY need to get a better-looking chair to go with that BEAUTIFUL desk!

Re: Bubinga & Curly Maple Partners' Desk

#23

More Questions regarding the drawers

Terry Alexander

>Aren't the Blumotion slides very expensive?

Are they as "fussy" (a Norm word) to install as....say....Accuride? ON the Accuride's you have 1/32" on each side to play with. I'm a pretty good woodworker, but 1/32" challenges my utmost skill.

tks

Terry Alexander in West Texas

Re: Bubinga & Curly Maple Partners' Desk

#24

Re: More Questions regarding the drawers

Hikmet C. Sakman

>Terry,

Yes they are fussy in furniture, less fussy in cabinetry. Actually what matters is the drawer front. If it's overlay, it's easier. If it's inset, it can very very fussy.

I don't know what Norm says, but there are easy ways to fix +/- 1/32" or 1/16" in these drawers. What matters is the side gables of the drawer bank. They have to be perfectly parrarel to each-other.

Since they have that slow motion closing action, if it's too tight, they won't close by themselves. Probably Norm is referring to that! ;-)

Chico...

Re: Bubinga & Curly Maple Partners' Desk

#25

Re: More Questions regarding the drawers

Fred Davis

>How do you make your drawers Terry?

I always use a drawer box and a separate drawer front

This allows you to assemble the drawer box and test if for fit , before you do the rest of the drawers and attach the fronts.

I also dovetail all four corners of any drawer , this is the best joint for Drawers , but you really need to pay attention to side play allowances using this joint.

If you have no trouble fitting a mitre for instance, the 1/32" tolerance is easy, always assuming the cabinet surrounding the drawers has parallel sides and top to bottom and front to back identical dimensions .

For flush drawers, it is like Chico mentioned "fussy" ;-))

FredD