Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

LIL HELP PLEASE

Posts

LIL HELP PLEASE

#1

LIL HELP PLEASE

Bob Boswood

>I am building a cabinet for the end of my new kitchen island. Size is 19x31x28 inches deep. There is 12 inch countertop overhang on that end of the island. I thought a wine storage cabinet would be great. 1 door with probably 4 pullouts large enough to hold 8 bottles each. I mocked up a double drawer setup with 2 sets of hd slides. It seems to work ok but i am concerned that with use and perhaps abuse it may fail. I am mostly a hobby woodworker so I was wondering if there were some other type of slide that would eliminate the need for two slides to achieve the ability to have a 28 inch drawer extend 40 inches , thus giving access to all the bottles in the drawers. If this makes sense to anyone I could use a LIL HELP.

Bob in AK.

Re: LIL HELP PLEASE

#2

Ellis Walentine

For the life of me...

Ellis Walentine

>...I can't picture this wine cabinet. But, if it is the slides you're worried about, all I can say is to use Accurides. When I was in the contract furniture business, our IE department routinely cycle-tested full extension Accuride filing cabinet slides to over 100000 cycles with no significant failures. Those were rated at 100 lbs. You could get away with less for eight wine bottles. The 40" extension is a rare bird though. I'd try to engineer it for a more common length, like 26".

Ellis Walentine, Host

Re: LIL HELP PLEASE

#3

Re: LIL HELP PLEASE

Chuck in ND

>I'm a little stumped also, how does a 28" deep cabinet fit inder a 12" overhang ? Could you draw something up ? You know what they say, guys are better with pictures.

Re: LIL HELP PLEASE

#4

I think I understand

Lee Schierer - McKean, PA

>My impression of your cabinet is that you need 12" over travel slides slides that fit into a 28" cabinet. I recently built a stereo cabinet looking for a similar thing. The most over travel I could find was about 4". However, In your case, I wonder if you could bolt a 3/4 extension 28" Accuride slide to a 28" full extension slide. I would go for the 100 or 150 pound capacity slide for the over travel set. This would make a slide on a slide arrangement, which at least in theory would work. I would buy two set of slides and build a mock up and test it with 3-4 times the weight of your bottles and shelf before investing in all the slides.

Lee

Re: LIL HELP PLEASE

#5

Re: I think I understand

Bob Boswood

>Sorry to confuse. I will try again. On the end of the island is an opening 19x31x28 deep. The sides of this opening is the backs of the base cabinets making up the island. All the cabinets sit on a base roughly 3 1/2" tall. The counter top over this area extends 12" out from this space where I am trying to build this wine storage cabinet. My idea was to make a drawer with no frt or back just sides and bottom attached to 28" slides and then attach another set of slides to the sides of this drawer with a normal drawer attached to that set of slides. So the whole unit comes out first 28" then extends out depending what length of slide used on the second drawer holding the wine. I don't know how to draw a picture for you to view. If what I have in mind does not work, maybe I will figure out how to send a drawing. Thanks very much.

Bob in AK.

Re: LIL HELP PLEASE

#6

Re: I think I understand

AZ, Colorado Springs

>How about making a two-part contraption? First, you have a sub cabinet that fits into the overall opening, which can pull out 12", to be flush with the overhang. Thie would either be hung on its own drawer slides, or maybe have wheels and guides and roll on the floor. (Then you could pull the whole thing out occasionally to vacuum away accumulated dog hair.)

Inside of that is the two drawers with the bottle racks, and they need simply to have full extension drawer slides to provide 100% access to the bottles.

When you have the bottles stowed, the drawers would telescope into the larger unit, which then recedes back under/into the kitchen cabinet.