Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Lunch box planer with spiral Cutter head?

Posts

Lunch box planer with spiral Cutter head?

#1

Lunch box planer with spiral Cutter head?

Barry Irby

>OK, I just spent a few minutes rummaging around on the Internet and did not find an answer.

Who makes a lunch box planer with a spiral cutter head? Anybody got one? What do you think?

Re: Lunch box planer with spiral Cutter head?

#2

Re: Lunch box planer with spiral Cutter head?

Thomas Skaggs, Foothills of Mount Level

>Probably doable but spiral heads tend to be a lot more massive. The lunchbox would need to be built accordingly.

Re: Lunch box planer with spiral Cutter head?

#4

Bart Goldberg

Re: Lunch box planer with spiral Cutter head?

Bart Goldberg

>Barry - You can get a spiral cutterhead upgrade for the Dewalt DW-735 lunchbox planer. I have this setup and am extremely satisfied with the performance.

Regards

Bart

Re: Lunch box planer with spiral Cutter head?

#5

Re: Lunch box planer with spiral Cutter head?

Barry Irby

>I have a Dewalt 733. The older one with the resharpenable blades. Wonder if the replacement head would work for that one?

Re: Lunch box planer with spiral Cutter head?

#6

Clint Searl

Re: Lunch box planer with spiral Cutter head?

Clint Searl

>I have the 12" and 13" Delta bench top planers w/straight cutters. Both perform admirably, especially the 13" two speed. The only negative is snipe. Does a spiral cutter eliminate it? If not, what's the advantage?

Clint

Re: Lunch box planer with spiral Cutter head?

#7

Re: Lunch box planer with spiral Cutter head?

Barry Irby

>Three advantages I hear about.

Significantly better cuts, especially in difficult wood. Interlocking or reversing grain, curly wood, Crotch wood etc.

With multiple cutters, Each with multiple edges, if you get a nick in a cutter, you just rotate it to a fresh edge, rather than change the knives.

And they run significantly quieter.

Re: Lunch box planer with spiral Cutter head?

#8

PS

Barry Irby

>I don't think the cutter would have any effect on snipe. That has more to do with locking the cutter head and proper adjustment of the infeed and out feed tables.

I also have a lunch box planer with standard knives and I think it does an excellent job in most wood. I have a Dewalt with the knives that can be sharpened multiple times. I sharpen them myself. Someday it will crap out and when i replace it I may "up grade" to a spiral cutter is they get good marks here.

Re: Lunch box planer with spiral Cutter head?

#9

Bart Goldberg

Re: Lunch box planer with spiral Cutter head?

Bart Goldberg

>They list the cutterhead for the Dewalt 734 and 735 planers. You would need to call Byrd or Holbren directly to see if it will fit the 733.

Bart

Re: Lunch box planer with spiral Cutter head?

#10

Bart Goldberg

Re: Lunch box planer with spiral Cutter head?

Bart Goldberg

>I use alot of highly figured wood in my projects. The fact that the spiral cutterhead nearly eliminates tear out is, to me, more than worth its cost.

Regards

Bart