Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Dewalt 735 planer out of whack

Posts

Dewalt 735 planer out of whack

#1

Dewalt 735 planer out of whack

Andy Wright - Allen, TX

>I have a Dewalt DW735 planer that I have had for a few years (I bought it not too long after they came out), and recently it has developed two problems

1) it sometimes leaves noticable snipe on the leading end of the board

2) the rollers sometimes slip causing the board to stop feeding, and have to give the board a nudge to get it moving again

I added tension to the adjustment chain yesterday which seemed to help a little, but I have been trying to finish a project and havent dug into the planer too deep for fear of taking it out of service while I am messing with it.

Does anyone have similar experience or advice on what adjustments to make to this particular thickness planer?

Re: Dewalt 735 planer out of whack

#2

JL

Re: Dewalt 735 planer out of whack

JL

>The rollers need cleaning every once in a while. It is almost as if they develop a "glaze". I usually clean them off with denatured alcohol or isopropyl alcohol. As for the snipe, I've got the infeed and outfeed attachments and I usually support the board as it comes out, so my snipe is minimal.

Re: Dewalt 735 planer out of whack

#3

Also...

DaleLenz

>Have you waxed the bed of the planer lately? Makes a world of difference, BTW.